Specification sheet Wheel Loader Ref bell-l1806c-plus-ii-wheel-loader

Bell L1806C Plus II

The Bell L1806C Plus II is a wheel loader with an operating weight of 36,596.74 lb (16,600 kg), a 181.1 hp engine, and a 3.93 yd³ (3 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
36,596.74lb
16,600kg
Engine power
181.1hp
135kW
Net Power
Bucket capacity
3.93yd³
3m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Bell L1806C Plus II sits above the median for its class:

  • Operating weight 36,600 lb heavier than 72% (n=439)
  • Engine power 181 hp more powerful than 66% (n=408)
  • Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)

Scale drawingdrawn to scale · mm

3502B514C7791A
Side elevation

01 Engine Specification

Engine Make 2240
Engine Model e 6081HF
Net Power 181.1hp 135kw

02 Operational Specification

Operating Weight 36596.8lb 16600kg
Fuel Capacity 63.5gal 240L
Static Tipping Weight 28790.2lb 13059kg
Tire Size 23.5x25

03 Transmission Specification

Transmission Type ZF 4WG210

04 Bucket Dimensions

Dump Clearance At Max Raise 10.08ft in 3072mm
Bucket Capacity - Heaped 3.93yd3 3m3
Breakout Force 37992.71lb 169kN

05 Dimensions Dimensions

Ground Clearance 1.69ft in 514mm
Length With Bucket On Ground 25.57ft in 7791mm
Height To Top Of Cab 11.49ft in 3502mm
Wheelbase 10.5ft in 3200mm
Reach At Max Lift And Dump 3.08ft in 936mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.