Specification sheet Wheel Loader Ref bell-l1706c-plus-ii-wheel-loader

Bell L1706C Plus II

The Bell L1706C Plus II is a wheel loader with an operating weight of 29,101.03 lb (13,200 kg), a 161 hp engine, and a 3.14 yd³ (2.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
29,101.03lb
13,200kg
Engine power
161hp
120kW
Net Power
Bucket capacity
3.14yd³
2.4m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Bell L1706C Plus II sits in the middle of its class:

  • Operating weight 29,100 lb lighter than 59% (n=439)
  • Engine power 161 hp less powerful than 54% (n=408)
  • Bucket capacity 3.1 yd³ smaller-bucket than 53% (n=387)

Scale drawingdrawn to scale · mm

3408B424C7391A
Side elevation

01 Engine Specification

Engine Make 2240
Engine Model e 6068TF250
Net Power 161hp 120kw

02 Operational Specification

Operating Weight 29101.1lb 13200kg
Fuel Capacity 58.2gal 220L
Static Tipping Weight 22954.6lb 10412kg
Tire Size 20.5x25

03 Transmission Specification

Transmission Type ZF 4WG160 counterhsaft

04 Bucket Dimensions

Dump Clearance At Max Raise 9.9ft in 3017mm
Bucket Capacity - Heaped 3.14yd3 2.4m3
Breakout Force 36868.67lb 164kN

05 Dimensions Dimensions

Ground Clearance 1.4ft in 424mm
Length With Bucket On Ground 24.25ft in 7391mm
Height To Top Of Cab 11.19ft in 3408mm
Wheelbase 9.85ft in 3000mm
Reach At Max Lift And Dump 2.84ft in 864mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.