Specification sheet Wheel Loader Ref bell-l1204c-plus-ii-wheel-loader
Bell L1204C Plus II
The Bell L1204C Plus II is a wheel loader with an operating weight of 22,575.34 lb (10,240 kg), a 116.7 hp engine, and a 2.49 yd³ (1.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,575.34lb
10,240kg
Engine power
116.7hp
87kW
Net Power Bucket capacity
2.49yd³
1.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Bell L1204C Plus II sits at the compact end of its class:
- Operating weight 22,580 lb lighter than 96% (n=439)
- Engine power 117 hp less powerful than 94% (n=408)
- Bucket capacity 2.5 yd³ smaller-bucket than 85% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | 6068TF250 | |
| Net Power | 116.7hp | 87kw |
02 Operational Specification
| Operating Weight | 22575.4lb | 10240kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Static Tipping Weight | 18285.2lb | 8294kg |
| Tire Size | 17.5x25 |
03 Transmission Specification
| Transmission Type | countershaft |
|---|
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.46ft in | 2882mm |
|---|---|---|
| Breakout Force | 26752.27lb | 119kN |
| Bucket Capacity - Heaped | 2.49yd3 | 1.9m3 |
| Bucket Width | 8.37ft in | 2550mm |
05 Dimensions Dimensions
| Ground Clearance | 1.14ft in | 345mm |
|---|---|---|
| Length With Bucket On Ground | 22.7ft in | 6916mm |
| Height To Top Of Cab | 10.55ft in | 3215mm |
| Wheelbase | 9.85ft in | 3000mm |
| Reach At Max Lift And Dump | 2.43ft in | 739mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.