Specification sheet Compact Track Loader Ref asv-sr80-multi-terrain-loader

ASV SR80

The ASV SR80 is a compact track loader with an operating weight of 8,972 lb (4,070 kg), a 78 hp engine, a rated operating capacity of 3,100 lb (1,406 kg), and a tipping load of 6,200 lb (2,812.28 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,972lb
4,070kg
Engine power
78hp
58kW
Net Power
Rated operating capacity
3,100lb
1,406kg
Tipping load
6,200lb † — value reconstructed from related published figures
2,812.28kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the ASV SR80 sits in the middle of its class:

  • Operating weight 8,970 lb lighter than 58% (n=182)
  • Engine power 78 hp more powerful than 63% (n=167)
  • Rated operating capacity 3,100 lb higher-rated than 67% (n=156)

◇Scale drawingdrawn to scale · mm

2184C381D3607A2845B1803E
Side elevation
2184C1829F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 804C-33T
Gross Power 80.5hp 60kw
Net Power 78hp 58kw
Power Measured @ 2600rpm
Peak Torque 186lb ft 253Nm
Displacement 201.4cu in 3.3L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 8972lb 4070kg
Fuel Capacity 18gal 68L
Hydraulic System Fluid Capacity 21gal 79L
Max Speed - Low Range 7mph 11.3km/h
Max Speed - High Range 12.5mph 20km/h

03 Loader Specification

Operating Load 3100lb 1406kg

04 Hydraulic Specification

Pump Flow 30gal/min 113.6L/min
Relief Valve Pressure 3000psi 20670kPa

05 Dimensions Dimensions

Width Over Tracks 6.01ft in 1829mm
Height To Top Of Cab 7.17ft in 2184mm
Ground Clearance 15in 381mm
Clearance At Max Lift And Dump 8.17ft in 2489mm
Reach At Max Lift And Dump 1.67ft in 508mm
Length With Bucket 11.84ft in 3607mm
Length With Out Bucket 9.34ft in 2845mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.92ft in 1803mm
Ground Pressure 3.15psi 21.7kPa
Width Of Track 20in 508mm
Ground Contact Area 2840in2 1.83m2

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.