Specification sheet Compact Track Loader Ref asv-rcv-vertical-lift-multi-terrain-loader

ASV RCV Vertical Lift

The ASV RCV Vertical Lift is a compact track loader with an operating weight of 10,500 lb (4,762.72 kg), a 86 hp engine, a rated operating capacity of 4,000 lb (1,814.37 kg), and a tipping load of 8,000 lb (3,628.74 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,500lb
4,762.72kg
Engine power
86hp
64.2kW
Gross Power
Rated operating capacity
4,000lb
1,814.37kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the ASV RCV Vertical Lift sits above the median for its class:

  • Operating weight 10,500 lb heavier than 77% (n=182)
  • Engine power 86 hp more powerful than 82% (n=167)
  • Rated operating capacity 4,000 lb higher-rated than 89% (n=156)

Scale drawingdrawn to scale · mm

2023C356D3880A2985B1842E
Side elevation
2023C1753F
Front elevation

01 Engine Specification

Engine Make 2351
Engine Model 1004C-44
Gross Power 86hp 64.2kw
Power Measured @ 2300rpm
Peak Torque 222lb ft 301Nm
Displacement 268cu in 4.4L
Aspiration naturally aspirated

02 Operational Specification

Operating Weight 10500lb 4762.8kg
Cooling System Fluid Capacity 3.2gal 12L
Fuel Capacity 26gal 98.5L
Engine Oil Capacity 2.2gal 8L
Hydraulic System Fluid Capacity 20.1gal 76L
Operating Voltage 12V
Alternator Supplied Amperage 65amps
Max Speed - High Range 6mph 9.7km/h

03 Loader Specification

Operating Load 4000lb 1814.4kg

04 Hydraulic Specification

Pump Flow 38gal/min 143.9L/min
Relief Valve Pressure 3300psi 22752.7kPa

05 Dimensions Dimensions

Width Over Tracks 5.76ft in 1753mm
Height To Top Of Cab 6.64ft in 2023mm
Ground Clearance 14.02in 356mm
Clearance At Max Lift And Dump 8.42ft in 2565mm
Reach At Max Lift And Dump 2.92ft in 889mm
Length With Bucket 12.73ft in 3880mm
Length With Out Bucket 9.8ft in 2985mm

06 Undercarriage Dimensions

Length Of Track On Ground 6.05ft in 1842mm
Track Gauge 4.59ft in 1397mm
Ground Contact Area 2604.01in2 1.68m2
Width Of Track 14.02in 356mm
Ground Pressure 3.6psi 24.8kPa

Data notes

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.