The ASV RC50 is a compact track loader with an operating weight of 6,200 lb (2,812.28 kg), a 50 hp engine, a rated operating capacity of 1,900 lb (861.83 kg), and a tipping load of 3,800 lb (1,723.65 kg).
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the ASV RC50 sits at the compact end of its class:
Operating weight6,200 lblighter than 91%(n=182)
Engine power50 hpless powerful than 92%(n=167)
Rated operating capacity1,900 lblower-rated than 83%(n=156)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Engine Make
2351
Engine Model
404C-22
Gross Power
50hp
37.3kw
Power Measured @
2800rpm
Peak Torque
105lb ft
142.4Nm
Displacement
134cu in
2.2L
02 Operational Specification
Operating Weight
6200lb
2812.3kg
Cooling System Fluid Capacity
2gal
7.6L
Engine Oil Capacity
2.8gal
10.6L
Fuel Capacity
15gal
56.8L
Hydraulic System Fluid Capacity
8gal
30.3L
Operating Voltage
12V
Alternator Supplied Amperage
55amps
Max Speed - High Range
8mph
12.9km/h
03 Loader Specification
Operating Load
1900lb
861.9kg
04 Hydraulic Specification
Pump Flow
16.3gal/min
61.8L/min
Relief Valve Pressure
3000psi
20684.3kPa
05 Dimensions Dimensions
F Width Over Tracks
5ft in
1524mm
C Height To Top Of Cab
6.42ft in
1956mm
D Ground Clearance
12.01in
305mm
A Length With Bucket
10.67ft in
3251mm
B Length With Out Bucket
8.34ft in
2540mm
06 Undercarriage Dimensions
E Length Of Track On Ground
4.92ft in
1499mm
Track Gauge
3.75ft in
1143mm
Ground Contact Area
1767.01in2
1.14m2
Number Of Track Rollers Per Side
6
Width Of Track
15in
381mm
Ground Pressure
3.5psi
24.14kPa
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.