Specification sheet Compact Track Loader Ref asv-rc30-multi-terrain-loader

ASV RC30

The ASV RC30 is a compact track loader with an operating weight of 3,305 lb (1,499.13 kg), a 31.5 hp engine, a rated operating capacity of 800 lb (362.88 kg), and a tipping load of 1,600 lb (725.75 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
3,305lb
1,499.13kg
Engine power
31.5hp
23.5kW
Gross Power
Rated operating capacity
800lb
362.88kg
Tipping load
1,600lb † — value reconstructed from related published figures
725.75kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the ASV RC30 sits at the compact end of its class:

  • Operating weight 3,310 lb lighter than 95% (n=182)
  • Engine power 32 hp less powerful than 95% (n=167)
  • Rated operating capacity 800 lb lower-rated than 96% (n=156)

◇Scale drawingdrawn to scale · mm

1803C254D2845A2311B1397E
Side elevation
1803C1181F
Front elevation

01 Engine Specification

Number Of Cylinders 3
Engine Make 2351
Engine Model 403C-15
Gross Power 31.5hp 23.5kw
Power Measured @ 2800rpm
Peak Torque 64.4lb ft 87.4Nm
Displacement 92cu in 1.6L

02 Operational Specification

Operating Weight 3305lb 1499.2kg
Cooling System Fluid Capacity 1.5gal 5.6L
Fuel Capacity 10.1gal 37.9L
Engine Oil Capacity 1.1gal 3.8L
Hydraulic System Fluid Capacity 8.1gal 30.3L
Operating Voltage 12V
Alternator Supplied Amperage 55amps
Max Speed - High Range 5.9mph 9.4km/h

03 Loader Specification

Operating Load 800lb 362.9kg

04 Hydraulic Specification

Pump Flow 10gal/min 37.9L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Dimensions Dimensions

Width Over Tracks 3.88ft in 1181mm
Height To Top Of Cab 5.92ft in 1803mm
Ground Clearance 10in 254mm
Length With Bucket 9.34ft in 2845mm
Length With Out Bucket 7.59ft in 2311mm

06 Undercarriage Dimensions

Length Of Track On Ground 4.59ft in 1397mm
Track Gauge 2.96ft in 901mm
Ground Contact Area 1178.01in2 0.76m2
Number Of Track Rollers Per Side 6
Width Of Track 11.03in 280mm
Ground Pressure 2.54psi 17.5kPa

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.