Specification sheet Compact Track Loader Ref asv-pt30-multi-terrain-loader

ASV PT30

The ASV PT30 is a compact track loader with an operating weight of 3,305 lb (1,500 kg), a 33.7 hp engine, a rated operating capacity of 800 lb (363 kg), and a tipping load of 1,600 lb (725.75 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
3,305lb
1,500kg
Engine power
33.7hp
25.1kW
Gross Power
Rated operating capacity
800lb
363kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the ASV PT30 sits at the compact end of its class:

  • Operating weight 3,310 lb lighter than 95% (n=182)
  • Engine power 34 hp less powerful than 94% (n=167)
  • Rated operating capacity 800 lb lower-rated than 96% (n=156)

Scale drawingdrawn to scale · mm

1803C254D2845A2311B1397E
Side elevation
1803C1219F
Front elevation

01 Engine Specification

Engine Make 2351
Engine Model 403C-15
Gross Power 33.7hp 25.1kw
Peak Torque 64.4lb ft 87Nm
Displacement 92cu in 1.5L
Aspiration Natural

02 Operational Specification

Operating Weight 3305lb 1500kg
Cooling System Fluid Capacity 1.5gal 5.6L
Fuel Capacity 10gal 37.9L
Engine Oil Capacity — value corrected — the source published it under the wrong unit 1.004gal 3.8L
Hydraulic System Fluid Capacity 8gal 30.3L
Operating Voltage 12V
Alternator Supplied Amperage 65amps
Max Speed - High Range 6mph 9.4km/h

03 Loader Specification

Operating Load 800lb 363kg

04 Hydraulic Specification

Pump Flow 10gal/min 37.9L/min
Relief Valve Pressure 3000psi 20670kPa

05 Dimensions Dimensions

Width Over Tracks 4ft in 1219mm
Height To Top Of Cab 5.92ft in 1803mm
Ground Clearance 10in 254mm
Length With Out Bucket 7.59ft in 2311mm
Length With Bucket 9.34ft in 2845mm

06 Undercarriage Dimensions

Length Of Track On Ground 4.59ft in 1397mm
Ground Contact Area 1183in2 76m2
Ground Pressure 2.8psi 19.2kPa
Number Of Track Rollers Per Side 12

Data notes

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Corrected value. The source published this figure under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.

  • Engine Oil Capacity: shown as 1.004 gal (source stated a value inconsistent with its own metric figure of 3.8 L)

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.