Specification sheet Compact Track Loader Ref asv-4810-multi-terrain-loader

ASV 4810

The ASV 4810 is a compact track loader with an operating weight of 8,640 lb (3,918 kg), a 105 hp engine, and a rated operating capacity of 2,065 lb (936.67 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,640lb
3,918kg
Engine power
105hp
78kW
Gross Power
Rated operating capacity
2,065lb
936.67kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the ASV 4810 sits below the median for its class:

  • Operating weight 8,640 lb lighter than 62% (n=182)
  • Engine power 105 hp more powerful than 97% (n=167)
  • Rated operating capacity 2,070 lb lower-rated than 73% (n=156)

Scale drawingdrawn to scale · mm

2096B406C2915A1994D
Side elevation
2096B1753E
Front elevation

01 Engine Specification

Engine Make 2236
Engine Model 3054T
Gross Power 105hp 78kw
Power Measured @ 2400rpm
Peak Torque 284lb ft 385Nm
Displacement 244cu in 4L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 8640lb 3918kg
Cooling System Fluid Capacity 9.5gal 36L
Fuel Capacity 25gal 94.6L
Engine Oil Capacity 2.1gal 7.8L
Hydraulic System Fluid Capacity 28gal 106L
Operating Voltage 12V
Alternator Supplied Amperage 65amps
Max Speed - High Range 6mph 9.7km/h

03 Loader Specification

Breakout Force 5900lb 2676kg
Operating Load 2065lb 936.7kg

04 Hydraulic Specification

Pump Flow 19gal/min 72L/min
Relief Valve Pressure 2950psi 20340kPa

05 Dimensions Dimensions

Width Over Tracks 5.76ft in 1753mm
Height To Top Of Cab 6.88ft in 2096mm
Ground Clearance 16in 406mm
Length With Out Bucket 9.57ft in 2915mm

06 Undercarriage Dimensions

Length Of Track On Ground 6.55ft in 1994mm
Ground Pressure 3psi 20.69kPa
Number Of Track Rollers Per Side 12
Width Of Track 18in 457mm
Ground Contact Area 2826in2 1.82m2

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.