Airman AX40U-4
The Airman AX40U-4 is a mini excavator with an operating weight of 9,656.3 lb, a 40 hp engine, and a dig depth of 11 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Airman AX40U-4 sits above the median for its class:
- Operating weight 9,660 lb heavier than 85% (n=438)
- Engine power 40 hp more powerful than 84% (n=448)
- Dig depth 11 ft deeper-digging than 77% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 17.52ft in | 5,340mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.87ft in | 3,923mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.87ft in | 5,752mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.86ft in | 2,701mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11ft in | 3,353mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.44ft in | 1,963mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.57ft in | 2,003mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.1ft in | 335mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 15.75in | 400mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.8mph | 4.5km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88 | |
| Gross Power | 40hp | 30kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2500rpm | |
| Displacement | 133.6cu in | 2,189cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 9656.3lb | 4,380kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 3481psi | 24,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 33.1gal/min | 125l/min‖ — metric converted from the published imperial value |
06 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.