Specification sheet Backhoe Loader Ref yanmar-cbl40-loader-backhoe

Yanmar CBL40

The Yanmar CBL40 is a backhoe loader with an operating weight of 7,750 lb (3,515.35 kg), a 35.4 hp engine, and a dig depth of 10.02 ft (3,052 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,750lb
3,515.35kg
Engine power
35.4hp
26.4kW
Net Power
Dig depth
10.02ft
3,052mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Yanmar CBL40 sits at the compact end of its class:

  • Engine power 35 hp less powerful than 94% (n=282)
  • Dig depth 10 ft shallower-digging than 91% (n=256)

Scale drawingdrawn to scale · mm

2626B321C5963A
Side elevation
2626B1778D
Front elevation

01 Engine Specification

Engine Make 2348
Gross Power 37.2hp 27.8kw
Net Power 35.4hp 26.4kw
Aspiration Turbocharged

02 Operational Specification

Fuel Capacity 16.4gal 62L
Max Weight 7750lb 3515.4kg
Turning Radius 8.4ft in 2559mm
Tire Size Front - 2wd / 4wd 27x10.5-15
Rear Tires Size 2wd/4wd 15-19.5

03 Transmission Specification

Transmission Type Mechanically controlled load sensing HMT
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 13.7mph 22.1km/h
Max Speed Reverse 13.7mph 22.1km/h

04 Hydraulic Specification

Pump Type 2x piston
Pump Flow Capacity 11.1gal/min 42L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Backhoe Dimensions

Load Height - Std 8.41ft in 2563mm
Reach From Swivel - Std 13.2ft in 4022mm
Dig Depth - Std 10.02ft in 3052mm

06 Dimensions Dimensions

Transport Length 19.57ft in 5963mm
Transport Width 5.84ft in 1778mm
Transport Height 8.62ft in 2626mm
Wheelbase 5.75ft in 1750mm
Ground Clearance 1.06ft in 321mm

07 Loader Dimensions

Clearance At Max Dump Height 7.24ft in 2204mm
Reach At Max Dump Height 1.96ft in 596mm
Lift Capacity At Full Height 2866lb 1300kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.