Specification sheet Wheel Loader Ref volvo-l330c-wheel-loader
Volvo L330C
The Volvo L330C is a wheel loader with an operating weight of 106,770 lb (48,430.06 kg), a 498 hp engine, and a 9.03 yd³ (6.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
106,770lb
48,430.06kg
Engine power
498hp
371.4kW
Net Power Bucket capacity
9.03yd³
6.9m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Volvo L330C sits in the middle of its class:
- Operating weight 106,770 lb lighter than 51% (n=39)
- Engine power 498 hp more powerful than 70% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 164 KAE | |
| Net Power | 498hp | 371.4kw |
| Gross Power | 503hp | 375.1kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 1748lb ft | 2370Nm |
| Displacement | 984cu in | 16.2L |
| Torque Measured @ | 1000rpm | |
| Aspiration | Turbocharged and Intercooled |
02 Operational Specification
| Operating Weight | 106770lb | 48430.1kg |
|---|---|---|
| Fuel Capacity | 183.1gal | 693L |
| Hydraulic System Fluid Capacity | 145.9gal | 552L |
| Engine Oil Fluid Capacity | 16.2gal | 61L |
| Cooling System Fluid Capacity | 23.8gal | 90L |
| Transmission Fluid Capacity | 24.4gal | 92L |
| Front Axle/Diff Fluid Capacity | 18gal | 68.1L |
| Rear Axle/Diff Fluid Capacity | 18gal | 68.1L |
| Static Tipping Weight | 77668.9lb | 35230kg |
| Turning Radius | 29.7ft in | 9050mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 35/65R33 XLD D1*L-4 |
03 Transmission Specification
| Transmission Type | Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.3mph | 34.3km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3118psi | 21497.9kPa |
|---|---|---|
| Pump Flow Capacity | 196gal/min | 742L/min |
| Raise Time | 8.5sec | |
| Dump Time | 1.8sec | |
| Lower Time | 4.5sec | |
| Pump Type | axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.01ft in | 3660mm |
|---|---|---|
| Bucket Capacity - Heaped | 9.03yd3 | 6.9m3 |
| Bucket Capacity - Struck | 7.72yd3 | 5.9m3 |
| Bucket Width | 13.03ft in | 3970mm |
| Breakout Force | 105120lb | 105120- |
06 Dimensions Dimensions
| Ground Clearance | 1.81ft in | 550mm |
|---|---|---|
| Length With Bucket On Ground | 33.08ft in | 10080mm |
| Width Over Tires | 11.91ft in | 3630mm |
| Height To Top Of Cab | 13.69ft in | 4170mm |
| Wheelbase | 13.33ft in | 4060mm |
| Hinge Pin - Max Height | 16.54ft in | 5040mm |
| Reach At Max Lift And Dump | 5.71ft in | 1740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.