This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Steering System Specification
Working Pressure
19 MPa, 2756 psi
Articulation Angle
40 degrees
Steering Cylinders
1
Maximum Flow
8.9gal/min
33.5L/min
02 Hydraulic Cycle Times (Unloaded) Specification
Lift
6.5sec
Lower
3.5sec
Dump Time
1.5sec
03 Electrical System Specification
Battery Capacity
100 Ah
Alternator Rating
1260/90 (W/A)
Starter Motor Output
4.1hp
3kw
Voltage
12 VV
Batteries
1 V
04 Engine Specification
Number Of Cylinders
4
Engine Model
Volvo D3.3M or D3.3H
Gross Power
74hp
55.2kw
Power Measured @
2600rpm
Max Torque
Gross - 265 Nm
Displacement
201.4cu in
3.3L
Torque Measured @
1500rpm
Aspiration
Turbocharged
Bore
3.9in
98mm
Stroke
4.8in
120mm
05 Drive Train Specification
Transport Speed, Maximum
18.7mph
30km/h
06 Operational Specification
Fuel Capacity
22.2gal
84L
Hydraulic System Fluid Capacity
14.3gal
54L
Engine Oil Fluid Capacity
3gal
11.2L
Cooling System Fluid Capacity
3gal
11L
07 Hydraulic System Specification
Working Pressure
23 MPa, 230 bar
Engine Speed
2600rpm
Pump Flow Capacity
15.1gal/min
57L/min
08 Bucket Dimensions
Breakout Force
13713.35lb
61kN
09 Dimensions Dimensions
C Ground Clearance
1.97ft in
600mm
A Length With Bucket On Ground
17.33ft in
5280mm
D Width Over Tires
6.03ft in
1835mm
B Height To Top Of Cab
8.99ft in
2740mm
Wheelbase
7.06ft in
2150mm
Hinge Pin - Max Height
10.7ft in
3260mm
?Questions & answersfrom this machine's data
What engine does a Volvo L30G wheel loader have?
A Volvo L30G wheel loader is powered by a Volvo D3.3M or D3.3H engine producing 74 hp (55.2 kW).
How much fuel does a Volvo L30G wheel loader hold?
A Volvo L30G wheel loader has a fuel capacity of 22.2 gal (84 L).
What is the ground clearance of a Volvo L30G wheel loader?
A Volvo L30G wheel loader has a ground clearance of 2 ft (600 mm).
How long is a Volvo L30G wheel loader?
A Volvo L30G wheel loader has an overall length of 17.3 ft (5,280 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.