Specification sheet Backhoe Loader Ref volvo-616-loader-backhoe
Volvo 616
The Volvo 616 is a backhoe loader with an operating weight of 18,386.56 lb (8,340 kg), a 80 hp engine, and a dig depth of 13.78 ft (4,200 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,386.56lb
8,340kg
Engine power
80hp
59.7kW
Gross Power Dig depth
13.78ft
4,200mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Volvo 616 sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
- Dig depth 13.8 ft shallower-digging than 81% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2244 | |
|---|---|---|
| Engine Model | BM D 42 | |
| Gross Power | 80hp | 59.7kw |
02 Operational Specification
| Max Weight | 18386.6lb | 8340kg |
|---|---|---|
| Turning Radius | 20.2ft in | 6150mm |
| Tire Size Front - 2wd / 4wd | 10.00-20/12 | |
| Rear Tires Size 2wd/4wd | 18.4-30/12 |
03 Transmission Specification
| Transmission Type | hydromechanical power shift gearbox | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.5mph | 29.7km/h |
| Max Speed Reverse | 18.5mph | 29.7km/h |
04 Backhoe Dimensions
| Load Height - Std | 10.27ft in | 3130mm |
|---|---|---|
| Reach From Swivel - Std | 17.49ft in | 5330mm |
| Dig Depth - Std | 13.78ft in | 4200mm |
| Reach At Load Height - Std | 7.88ft in | 2400mm |
05 Dimensions Dimensions
| Transport Length | 26.68ft in | 8130mm |
|---|---|---|
| Transport Height | 13.46ft in | 4100mm |
| Wheelbase | 7.71ft in | 2350mm |
| Height To Top Of Suspended Cab | 9.13ft in | 2780mm |
06 Loader Dimensions
| Clearance At Max Dump Height | 9.59ft in | 2920mm |
|---|---|---|
| Reach At Max Dump Height | 2.27ft in | 690mm |
| Lift Capacity At Full Height | 5070lb | 2299.72kg |
| Bucket Breakout Force | 8600lb | 38.26kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.