Specification sheet Backhoe Loader Ref venieri-vf9-23-loader-backhoe
Venieri VF9.23
The Venieri VF9.23 is a backhoe loader with a 112.7 hp engine, a 1.57 yd³ (1.2 m³) bucket, and a dig depth of 17.72 ft (5,400 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
112.7hp
84kW
Gross Power Bucket capacity
1.57yd³
1.2m³
Dig depth
17.72ft
5,400mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Venieri VF9.23 sits at the heavy end of its class:
- Engine power 113 hp more powerful than 97% (n=282)
- Dig depth 17.7 ft deeper-digging than 95% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004-40T | |
| Gross Power | 112.7hp | 84kw |
| Power Measured @ | 2200rpm | |
| Displacement | 244.1cu in | 4L |
02 Operational Specification
| Operating Weight 4wd | 18739.3lb | 8500kg |
|---|---|---|
| Turning Radius | 14.8ft in | 4500mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 20.6mph | 33km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 38.4gal/min | 145L/min |
| Relief Valve Pressure | 3335.9psi | 23000kPa |
05 Backhoe Dimensions
| Load Height - Std | 17.07ft in | 5200mm |
|---|---|---|
| Reach From Swivel - Std | 18.21ft in | 5550mm |
| Dig Depth - Std | 17.72ft in | 5400mm |
06 Dimensions Dimensions
| Transport Length | 19.03ft in | 5800mm |
|---|---|---|
| Transport Width | 7.39ft in | 2250mm |
| Transport Height | 11.59ft in | 3530mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11.16ft in | 3400mm |
|---|---|---|
| Bucket Width | 88.59in | 2250mm |
| Bucket Capacity | 1.57yd3 | 1.2m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.