Specification sheet Backhoe Loader Ref venieri-vf7-23b-loader-backhoe
Venieri VF7.23B
The Venieri VF7.23B is a backhoe loader with a 100.6 hp engine, a 1.12 yd³ (0.85 m³) bucket, and a dig depth of 16.74 ft (5,100 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
100.6hp
75kW
Gross Power Bucket capacity
1.12yd³
0.85m³
Dig depth
16.74ft
5,100mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Venieri VF7.23B sits at the heavy end of its class:
- Engine power 101 hp more powerful than 89% (n=282)
- Dig depth 16.7 ft deeper-digging than 90% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004-40T | |
| Gross Power | 100.6hp | 75kw |
| Power Measured @ | 2200rpm | |
| Aspiration | Turbocharged | |
| Displacement | 244.1cu in | 4L |
02 Operational Specification
| Operating Weight 4wd | 15873.3lb | 7200kg |
|---|---|---|
| Turning Radius | 14ft in | 4250mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 18.7mph | 30km/h |
| Max Speed Reverse | 18.7mph | 30km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 29.4gal/min | 111L/min |
| Relief Valve Pressure | 3335.9psi | 23000kPa |
05 Backhoe Dimensions
| Load Height - Std | 16.08ft in | 4900mm |
|---|---|---|
| Reach From Swivel - Std | 18.16ft in | 5535mm |
| Dig Depth - Std | 16.74ft in | 5100mm |
06 Dimensions Dimensions
| Transport Length | 18.15ft in | 5530mm |
|---|---|---|
| Transport Width | 6.89ft in | 2100mm |
| Transport Height | 10.67ft in | 3250mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11ft in | 3350mm |
|---|---|---|
| Bucket Width | 82.68in | 2100mm |
| Bucket Capacity | 1.12yd3 | 0.85m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.