Specification sheet Backhoe Loader Ref venieri-vf5-23d-loader-backhoe
Venieri VF5.23D
The Venieri VF5.23D is a backhoe loader with a 65.8 hp engine, a 0.99 yd³ (0.75 m³) bucket, and a dig depth of 13.46 ft (4,100 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
65.8hp
49kW
Gross Power Bucket capacity
0.99yd³
0.75m³
Dig depth
13.46ft
4,100mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Venieri VF5.23D sits below the median for its class:
- Engine power 66 hp less powerful than 77% (n=282)
- Dig depth 13.5 ft shallower-digging than 83% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 704-30 | |
| Gross Power | 65.8hp | 49kw |
| Power Measured @ | 2400rpm | |
| Displacement | 238cu in | 3.9L |
02 Operational Specification
| Operating Weight 4wd | 14330.1lb | 6500kg |
|---|---|---|
| Turning Radius | 14.8ft in | 4500mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 19.9mph | 32km/h |
| Max Speed Reverse | 19.9mph | 32km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 21.7gal/min | 82L/min |
| Relief Valve Pressure | 3335.9psi | 23000kPa |
05 Backhoe Dimensions
| Load Height - Std | 15.01ft in | 4575mm |
|---|---|---|
| Reach From Swivel - Std | 15.33ft in | 4670mm |
| Dig Depth - Std | 13.46ft in | 4100mm |
06 Dimensions Dimensions
| Transport Length | 17.48ft in | 5325mm |
|---|---|---|
| Transport Width | 6.24ft in | 1900mm |
| Transport Height | 9.52ft in | 2900mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11.98ft in | 3650mm |
|---|---|---|
| Bucket Width | 72.84in | 1850mm |
| Bucket Capacity | 0.99yd3 | 0.75m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.