Specification sheet Backhoe Loader Ref venieri-vf10-23-loader-backhoe
Venieri VF10.23
The Venieri VF10.23 is a backhoe loader with a 115.4 hp engine, a 1.71 yd³ (1.3 m³) bucket, and a dig depth of 19.69 ft (6,000 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
115.4hp
86kW
Gross Power Bucket capacity
1.71yd³
1.3m³
Dig depth
19.69ft
6,000mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Venieri VF10.23 sits at the heavy end of its class:
- Engine power 115 hp more powerful than 98% (n=282)
- Dig depth 19.7 ft deeper-digging than 100% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1104-44T | |
| Gross Power | 115.4hp | 86kw |
| Power Measured @ | 2200rpm | |
| Aspiration | Turbocharged | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Operating Weight 4wd | 18959.8lb | 8600kg |
|---|---|---|
| Turning Radius | 16.1ft in | 4900mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 23.7mph | 38km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 38.4gal/min | 145L/min |
| Relief Valve Pressure | 3335.9psi | 23000kPa |
05 Backhoe Dimensions
| Load Height - Std | 17.39ft in | 5300mm |
|---|---|---|
| Reach From Swivel - Std | 18.38ft in | 5600mm |
| Dig Depth - Std | 19.69ft in | 6000mm |
06 Dimensions Dimensions
| Transport Length | 19.69ft in | 6000mm |
|---|---|---|
| Transport Width | 7.74ft in | 2359mm |
| Transport Height | 11.59ft in | 3530mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11.49ft in | 3500mm |
|---|---|---|
| Bucket Width | 92.52in | 2350mm |
| Bucket Capacity | 1.71yd3 | 1.3m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.