Specification sheet Backhoe Loader Ref venieri-vf1-33-loader-backhoe
Venieri VF1.33
The Venieri VF1.33 is a backhoe loader with a 47 hp engine, a 0.46 yd³ (0.35 m³) bucket, and a dig depth of 9.03 ft (2,750 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
47hp
35kW
Gross Power Bucket capacity
0.46yd³
0.35m³
Dig depth
9.03ft
2,750mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Venieri VF1.33 sits at the compact end of its class:
- Engine power 47 hp less powerful than 89% (n=282)
- Dig depth 9 ft shallower-digging than 94% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 104-22 | |
| Gross Power | 47hp | 35kw |
| Power Measured @ | 2500rpm | |
| Displacement | 177cu in | 2.9L |
02 Operational Specification
| Operating Weight 4wd | 7275.3lb | 3300kg |
|---|---|---|
| Turning Radius | 6.8ft in | 2050mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 11.2mph | 18km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 11.7gal/min | 44L/min |
| Relief Valve Pressure | 399.6psi | 2755kPa |
05 Backhoe Dimensions
| Load Height - Std | 8.62ft in | 2625mm |
|---|---|---|
| Reach From Swivel - Std | 12.18ft in | 3710mm |
| Dig Depth - Std | 9.03ft in | 2750mm |
06 Dimensions Dimensions
| Transport Length | 12.31ft in | 3750mm |
|---|---|---|
| Transport Width | 4.43ft in | 1350mm |
| Transport Height | 7.39ft in | 2250mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 10.77ft in | 3280mm |
|---|---|---|
| Bucket Width | 53.15in | 1350mm |
| Bucket Capacity | 0.46yd3 | 0.35m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.