Specification sheet Backhoe Loader Ref terex-980-elite-loader-backhoe
Terex 980 Elite
The Terex 980 Elite is a backhoe loader with an operating weight of 16,581 lb (7,521.02 kg), a 94 hp engine, a 1.57 yd³ (1.2 m³) bucket, and a dig depth of 14.54 ft (4,431 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,581lb
7,521.02kg
Engine power
94hp
70.1kW
Net Power Bucket capacity
1.57yd³
1.2m³
Dig depth
14.54ft
4,431mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Terex 980 Elite sits above the median for its class:
- Engine power 94 hp more powerful than 66% (n=282)
- Dig depth 14.5 ft shallower-digging than 52% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 1104C-44T | |
|---|---|---|
| Net Power | 94hp | 70.1kw |
| Gross Power | 100hp | 74.6kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 415lb ft | 562.7Nm |
| Displacement | 269cu in | 4.5L |
02 Operational Specification
| Fuel Capacity | 34.4gal | 130L |
|---|---|---|
| Max Weight | 16581lb | 7521.1kg |
| Hydraulic System Fluid Capacity | 37.8gal | 143L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle Fluid Capacity | 3.2gal | 12L |
| Rear Axle Fluid Capacity | 3.5gal | 13L |
| Turning Radius | 18.8ft in | 5700mm |
| Tire Size Front - 2wd / 4wd | 16.9x24 | |
| Rear Tires Size 2wd/4wd | 16.9x24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 75amps |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 25.9mph | 41.6km/h |
| Max Speed Reverse | 8.1mph | 13km/h |
04 Hydraulic Specification
| Pump Type | twin gear | |
|---|---|---|
| Pump Flow Capacity | 42.3gal/min | 160L/min |
| Relief Valve Pressure | 3250psi | 22408kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.79ft in | 3593mm |
|---|---|---|
| Reach From Swivel - Std | 18.79ft in | 5725mm |
| Dig Depth - Std | 14.54ft in | 4431mm |
| Reach At Load Height - Std | 6.55ft in | 1996mm |
| Bucket Dig Force - Std | 11596.32lb | 5260kg |
| Bucket Dig Force - Ext | 11596.32lb | 5260kg |
| Reach From Swivel - Ext | 23.02ft in | 7016mm |
| Dig Depth - Ext | 18.95ft in | 5775mm |
| Reach At Load Height - Ext | 9.6ft in | 2924mm |
| Load Height - Ext | 15ft in | 4571mm |
06 Dimensions Dimensions
| Transport Length | 24.04ft in | 7325mm |
|---|---|---|
| Transport Width | 7.84ft in | 2387mm |
| Transport Height | 12.48ft in | 3802mm |
| Wheelbase | 6.86ft in | 2090mm |
| Ground Clearance | 1.52ft in | 463mm |
| Height To Top Of Suspended Cab | 9.22ft in | 2810mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.76ft in | 2669mm |
|---|---|---|
| Reach At Max Dump Height | 2.12ft in | 645mm |
| Dig Depth | 4.57in | 116mm |
| Lift Capacity At Full Height | 8728.11lb | 3959kg |
| Bucket Capacity | 1.57yd3 | 1.2m3 |
| Bucket Width | 93.98in | 2387mm |
| Bucket Breakout Force | 12256lb | 54.52kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.