Specification sheet Backhoe Loader Ref terex-820-loader-backhoe

Terex 820

The Terex 820 is a backhoe loader with an operating weight of 15,763 lb (7,149.98 kg), a 86 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 14.67 ft (4,471 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
15,763lb
7,149.98kg
Engine power
86hp
64.14kW
Net Power
Bucket capacity
1.31yd³
1m³
Dig depth
14.67ft
4,471mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Terex 820 sits in the middle of its class:

  • Engine power 86 hp more powerful than 50% (n=282)
  • Dig depth 14.7 ft deeper-digging than 56% (n=256)

Scale drawingdrawn to scale · mm

3762B390C7338A
Side elevation
3762B2311D
Front elevation

01 Engine Specification

Engine Model 1104C-44T
Net Power 86hp 64.2kw
Gross Power 92hp 68.7kw
Power Measured @ 2200rpm
Torque Measured @ 1400rpm
Net Max Torque 291lb ft 394.6Nm
Displacement 269cu in 4.5L

02 Operational Specification

Fuel Capacity 34.4gal 130L
Max Weight 15763lb 7150kg
Hydraulic System Fluid Capacity 37.8gal 143L
Oil System Fluid Capacity 2.3gal 8.5L
Cooling System Fluid Capacity 4.3gal 16L
Transmission Fluid Capacity 4gal 15L
Front Axle Fluid Capacity 3.4gal 12.5L
Rear Axle Fluid Capacity 4.7gal 17.5L
Turning Radius 12.7ft in 3850mm
Tire Size Front - 2wd / 4wd 12.5x18
Rear Tires Size 2wd/4wd 16.9x28
Operating Voltage 12V
Alternator Supplied Amperage 75amps

03 Transmission Specification

Transmission Type 4 speed synchro gearbox
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 24.9mph 40km/h
Max Speed Reverse 25.5mph 41km/h

04 Hydraulic Specification

Pump Type twin gear
Pump Flow Capacity 37.6gal/min 142L/min
Relief Valve Pressure 3250psi 22408kPa

05 Backhoe Dimensions

Load Height - Std 11.66ft in 3553mm
Reach From Swivel - Std 18.8ft in 5730mm
Dig Depth - Std 14.67ft in 4471mm
Reach At Load Height - Std 6.55ft in 1996mm
Load Height - Ext 14.87ft in 4531mm
Bucket Dig Force - Ext 11596.32lb 5260kg
Bucket Dig Force - Std 11596.32lb 5260kg
Dig Depth - Ext 19.08ft in 5815mm
Reach At Load Height - Ext 9.6ft in 2924mm
Load At Max Lift - Ext 1790.16lb 812kg
Load At Max Lift - Std 3051.2lb 1384kg
Reach From Swivel - Ext 23.04ft in 7020mm

06 Dimensions Dimensions

Transport Length 24.08ft in 7338mm
Transport Width 7.59ft in 2311mm
Transport Height 12.35ft in 3762mm
Wheelbase 6.99ft in 2130mm
Ground Clearance 1.28ft in 390mm
Height To Top Of Suspended Cab 9.09ft in 2770mm

07 Loader Dimensions

Clearance At Max Dump Height 8.63ft in 2629mm
Reach At Max Dump Height 2.12ft in 645mm
Dig Depth 6.15in 156mm
Bucket Breakout Force 1069191.35lb 4756kN
Bucket Width 90.99in 2311mm
Bucket Capacity 1.31yd3 1m3
Lift Capacity At Full Height 7603.75lb 3449kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.