Specification sheet Wheel Loader Ref new-holland-w170c-wheel-loader
New Holland W170C
The New Holland W170C is a wheel loader with a 195 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
195hp
145.42kW
Gross Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Max Torque Iso Tr14396 | 700.7lb ft | 950Nm |
| Def/Adblue® Tank Capacity | 11gal | 41.3L |
| Gross Power | 195hp | 145.5kw |
| Power Measured @ | 1800rpm | |
| Torque Measured @ | 1300rpm |
02 Operational Specification
| Fuel Capacity | 65gal | 246L |
|---|---|---|
| Hydraulic System Fluid Capacity | 47.6gal | 180L |
| Engine Oil Fluid Capacity | 4gal | 15L |
| Transmission Fluid Capacity | 9gal | 34L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23,5R25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 16.2mph | 26km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 54.5gal/min | 206L/min |
|---|---|---|
| Raise Time | 5.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.5sec | |
| Pump Type | Tandem Variable |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.62ft in | 2930mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Width | 8.96ft in | 2730mm |
| Breakout Force | 31385.01lb | 139.61kN |
06 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 390mm |
|---|---|---|
| Length With Bucket On Ground | 25.1ft in | 7650mm |
| Width Over Tires | 8.7ft in | 2650mm |
| Height To Top Of Cab | 11.09ft in | 3380mm |
| Wheelbase | 10.67ft in | 3250mm |
| Hinge Pin - Max Height | 13.06ft in | 3980mm |
| Reach At Max Lift And Dump | 3.71ft in | 1130mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.