Specification sheet Wheel Loader Ref new-holland-lw130-b-wheel-loader
New Holland LW130.B
The New Holland LW130.B is a wheel loader with a 149 hp engine, and a 2.57 yd³ (1.96 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
149hp
111.2kW
Net Power Bucket capacity
2.57yd³
1.96m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2249 | |
|---|---|---|
| Engine Model | 668TA/M2, Tier 2 certified | |
| Net Power | 149hp | 111.2kw |
| Gross Power | 139hp | 103.7kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 495lb ft | 671Nm |
| Displacement | 408.9cu in | 6.7L |
| Aspiration | Turbocharged, air to air cooled | |
| Torque Rise | 33% |
02 Operational Specification
| Fuel Capacity | 50gal | 189L |
|---|---|---|
| Hydraulic System Fluid Capacity | 30.1gal | 113.6L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5x25 12 ply |
03 Transmission Specification
| Transmission Type | Countershaft, power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.6km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600.2psi | 24822kPa |
|---|---|---|
| Pump Flow Capacity | 45.2gal/min | 171L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4.4sec | |
| Pump Type | variable-displacement, piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.32ft in | 2839mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.57yd3 | 1.96m3 |
| Bucket Capacity - Struck | 2.18yd3 | 1.66m3 |
| Bucket Width | 8.54ft in | 2602mm |
| Breakout Force | 26572.42lb | 118.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 474mm |
|---|---|---|
| Length With Bucket On Ground | 22.63ft in | 6896mm |
| Width Over Tires | 7.95ft in | 2423mm |
| Height To Top Of Cab | 10.8ft in | 3290mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.55ft in | 3823mm |
| Reach At Max Lift And Dump | 2.74ft in | 835mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.