Specification sheet Backhoe Loader Ref new-holland-b95tc-loader-backhoe
New Holland B95TC
The New Holland B95TC is a backhoe loader with an operating weight of 19,340 lb (8,772.48 kg), a 88.51 hp engine, a 1.3 yd³ (1 m³) bucket, and a dig depth of 13.99 ft (4,262 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,340lb
8,772.48kg
Engine power
88.51hp
66kW
Net Power Bucket capacity
1.3yd³
1m³
Dig depth
13.99ft
4,262mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the New Holland B95TC sits in the middle of its class:
- Engine power 89 hp more powerful than 55% (n=282)
- Dig depth 14 ft shallower-digging than 77% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 445T/M2 | |
| Net Power | 88.6hp | 66kw |
| Gross Power | 95.3hp | 71kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 293.6lb ft | 398Nm |
| Aspiration | Turbocharged | |
| Displacement | 274.7cu in | 4.5L |
02 Operational Specification
| Operating Weight 2wd | 16567lb | 7514.7kg |
|---|---|---|
| Operating Weight 4wd | 16953lb | 7689.8kg |
| Fuel Capacity | 35.7gal | 135L |
| Max Weight | 19340lb | 8772.5kg |
| Hydraulic System Fluid Capacity | 31gal | 117.4L |
| Oil System Fluid Capacity | 3.6gal | 13.7L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Tire Size Front - 2wd / 4wd | 12-16.5 | |
| Rear Tires Size 2wd/4wd | 19.5L-24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | Power-Reversing/Torque Conv | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.1mph | 32.2km/h |
04 Hydraulic Specification
| Pump Type | Dual Gear | |
|---|---|---|
| Pump Flow Capacity | 39.9gal/min | 151L/min |
| Relief Valve Pressure | 3045psi | 20994.6kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.16ft in | 3705mm |
|---|---|---|
| Reach From Swivel - Std | 18.18ft in | 5539mm |
| Dig Depth - Std | 13.99ft in | 4262mm |
| Reach At Load Height - Std | 5.53ft in | 1683mm |
| Bucket Dig Force - Std | 12808.86lb | 5810kg |
| Bucket Dig Force - Ext | 12808.86lb | 5810kg |
| Reach From Swivel - Ext | 21.83ft in | 6651mm |
| Dig Depth - Ext | 17.93ft in | 5464mm |
| Reach At Load Height - Ext | 8.82ft in | 2687mm |
| Load Height - Ext | 14.61ft in | 4453mm |
06 Dimensions Dimensions
| Transport Length | 23.9ft in | 7284mm |
|---|---|---|
| Transport Width | 7.42ft in | 2261mm |
| Transport Height | 13.01ft in | 3965mm |
| Wheelbase | 7.14ft in | 2175mm |
| Ground Clearance | 1.3ft in | 394mm |
| Height To Top Of Suspended Cab | 9.47ft in | 2885mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.09ft in | 2463mm |
|---|---|---|
| Reach At Max Dump Height | 3.5ft in | 1064mm |
| Dig Depth | 7.49in | 190mm |
| Lift Capacity At Full Height | 7209.12lb | 3270kg |
| Bucket Capacity | 1.3yd3 | 1m3 |
| Bucket Width | 87.21in | 2215mm |
| Bucket Breakout Force | 12030lb | 53.52kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.