Specification sheet Backhoe Loader Ref new-holland-b95c-tc-loader-backhoe
New Holland B95C TC
The New Holland B95C TC is a backhoe loader with a 95 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
95hp
70.85kW
Net Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the New Holland B95C TC sits above the median for its class:
- Engine power 95 hp more powerful than 72% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | FPT F5BFL413B*B003 | |
|---|---|---|
| Gross Power | 97hp | 72.4kw |
| Net Power | 95hp | 70.9kw |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 339lb ft | 459.7Nm |
| Displacement | 207cu in | 3.4L |
02 Capacities Specification
| Fuel Tank | 34.7gal | 131L |
|---|---|---|
| Hydraulic Tank | 13.4gal | 50.7L |
| Cooling System | 6.4gal | 24L |
| Def Tank | 3.5gal | 13.2L |
| Hydraulic System | 29.4gal | 111L |
| Engine Oil | 2.2gal | 8L |
03 Transmission Specification
| Power Shuttle Gear Forward | 4 | |
|---|---|---|
| Power Shuttle Gear Reverse | 4 | |
| Powershift Gear Forward | 4 | |
| Powershift Gear Reverse | 3 | |
| Shuttle Max Forward Speed | 22.5mph | 36.3km/h |
| Shift Max Fwd Travel Speed | 22.1mph | 35.6km/h |
04 Weights Specification
| Base Unit | 17392.3lb | 7889kg |
|---|
05 Hydraulic System Specification
| System Relief Pressure | 3045psi | 20994.6kPa |
|---|---|---|
| Pump Flow Capacity | 40gal/min | 151.5L/min |
06 Backhoe Dimensions
| Standard Max Dig Depth | 14.53ft in | 4426mm |
|---|---|---|
| Standard Max Pin Height | 14.81ft in | 4513mm |
| Standard Reach From Swing Post, | 17.02ft in | 5186mm |
| Extended Loading Height | 14.6ft in | 4450mm |
| Extended Loading Reach @ Max Height | 7.46ft in | 2272mm |
| Extended Max Dig Depth | 18.45ft in | 5623mm |
| Extended Max Pin Height | 18.7ft in | 5698mm |
| Extended Reach From Swing Post | 20.61ft in | 6279mm |
| Standard Bucket Capacity | 0.28yd3 | 0.21m3 |
| Standard Bucket Digging Force | 12932.32lb | 5866kg |
| Standard Crowd Digging Force | 8587.01lb | 3895kg |
| Standard Loading Height | 12.06ft in | 3673mm |
| Standard Loading Reach @ Max Height | 4.47ft in | 1362mm |
07 Dimensions Dimensions
| Transport Length | 24.04ft in | 7325mm |
|---|---|---|
| Transport Width | 7.55ft in | 2300mm |
| Transport Height | 12.52ft in | 3815mm |
| Wheelbase | 85.63in | 2175mm |
| Ground Clearance | 15.52in | 394mm |
| Stabilizer Operating | 10.59ft in | 3226mm |
| Height To Top Of Suspended Cab | 9.42ft in | 2870mm |
| Stabilizer Spread | 10.59ft in | 3226mm |
08 Loader Dimensions
| Reach At Max Dump Height | 2.72ft in | 829mm |
|---|---|---|
| Bucket Breakout Force | 173124lb | 770.1kN |
| Lift Capacity At Full Height | 14427.05lb | 6544kg |
| Height To Hinge Pin | 11.35ft in | 3458mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.