Specification sheet Backhoe Loader Ref new-holland-b95c-loader-backhoe
New Holland B95C
The New Holland B95C is a backhoe loader with a 95 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
95hp
70.85kW
Net Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the New Holland B95C sits above the median for its class:
- Engine power 95 hp more powerful than 72% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | FPT F5BFL413B*B003 | |
|---|---|---|
| Gross Power | 97hp | 72.4kw |
| Net Power | 95hp | 70.9kw |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 338lb ft | 458.3Nm |
| Displacement | 207cu in | 3.4L |
02 Capacities Specification
| Fuel Tank | 34.7gal | 131L |
|---|---|---|
| Hydraulic Tank | 13.4gal | 50.7L |
| Cooling System | 6.4gal | 24L |
| Def Tank | 3.5gal | 13.2L |
| Hydraulic System | 29.4gal | 111L |
| Engine Oil | 2.2gal | 8L |
03 Transmission Specification
| Power Shuttle Gear Forward | 4 | |
|---|---|---|
| Power Shuttle Gear Reverse | 4 | |
| Powershift Gear Forward | 4 | |
| Powershift Gear Reverse | 3 | |
| Shuttle Max Forward Speed | 22.5mph | 36.3km/h |
| Shift Max Fwd Travel Speed | 22.1mph | 35.6km/h |
04 Weights Specification
| Base Unit | 17559.9lb | 7965kg |
|---|
05 Hydraulic System Specification
| System Relief Pressure | 3045psi | 20994.6kPa |
|---|---|---|
| Pump Flow Capacity | 40gal/min | 151.5L/min |
06 Backhoe Dimensions
| Standard Max Dig Depth | 14.53ft in | 4426mm |
|---|---|---|
| Standard Max Pin Height | 14.81ft in | 4513mm |
| Standard Reach From Swing Post, | 17.02ft in | 5186mm |
| Extended Loading Height | 14.6ft in | 4450mm |
| Extended Loading Reach @ Max Height | 7.46ft in | 2272mm |
| Extended Max Dig Depth | 18.45ft in | 5623mm |
| Extended Max Pin Height | 18.7ft in | 5698mm |
| Extended Reach From Swing Post | 20.61ft in | 6279mm |
| Standard Bucket Capacity | 0.28yd3 | 0.21m3 |
| Standard Bucket Digging Force | 12932.32lb | 5866kg |
| Standard Crowd Digging Force | 8587.01lb | 3895kg |
| Standard Loading Height | 12.06ft in | 3673mm |
| Standard Loading Reach @ Max Height | 4.47ft in | 1362mm |
07 Dimensions Dimensions
| Transport Length | 23.07ft in | 7030mm |
|---|---|---|
| Transport Width | 7.55ft in | 2300mm |
| Transport Height | 12.52ft in | 3815mm |
| Wheelbase | 85.63in | 2175mm |
| Ground Clearance | 15.52in | 394mm |
| Stabilizer Operating | 10.59ft in | 3226mm |
| Height To Top Of Suspended Cab | 9.42ft in | 2870mm |
| Stabilizer Spread | 10.59ft in | 3226mm |
08 Loader Dimensions
| Reach At Max Dump Height | 2.38ft in | 725mm |
|---|---|---|
| Bucket Breakout Force | 1187.75lb | 5.29kN |
| Lift Capacity At Full Height | 7996.17lb | 3627kg |
| Height To Hinge Pin | 11.43ft in | 3481mm |
?Questions & answersfrom this machine's data
- What engine does a New Holland B95C backhoe loader have?
- A New Holland B95C backhoe loader is powered by a FPT F5BFL413B*B003 engine producing 95 hp (70.9 kW).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.