Specification sheet Backhoe Loader Ref new-holland-555d-loader-backhoe
New Holland 555D
The New Holland 555D is a backhoe loader with a 65 hp engine, and a dig depth of 14.74 ft (4,490 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
65hp
48.48kW
Net Power Dig depth
14.74ft
4,490mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the New Holland 555D sits below the median for its class:
- Engine power 65 hp less powerful than 78% (n=282)
- Dig depth 14.7 ft deeper-digging than 57% (n=256)
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | Ford | |
| Net Power | 65hp | 48.5kw |
| Power Measured @ | 2200rpm | |
| Displacement | 428cu in | 7.1L |
| Bore | 4.2in | 105mm |
| Stroke | 5.4in | 134.9mm |
| Engine Model | Cat C7.1 ACERT | |
| Derating Altitude | 9843ft in | 3000.2m |
| Electrical System | 24V | |
| Battery Quantity | 2 | |
| Battery - Volts | 12V | |
| Battery Capacity | 950 CCA | |
| Maximum Torque At Rated Speed | 922 N-m at 1400 RPM |
02 Operational Specification
| Operating Voltage | 12V |
|---|
03 Power Train Specification
| Travel Speed - Forward 1 | 3.5mph | 5.7km/h |
|---|---|---|
| Travel Speed - Forward 2 | 4.7mph | 7.6km/h |
| Travel Speed - Forward 3 | 6.5mph | 10.5km/h |
| Travel Speed - Forward 4 | 8.8mph | 14.2km/h |
| Travel Speed - Reverse 1 | 3.5mph | 5.7km/h |
| Travel Speed - Reverse 2 | 6.5mph | 10.5km/h |
| Travel Speed - Reverse 3 | 11.8mph | 19km/h |
| Transmission Cooler Type | Water to Oil | |
| Transmission | Countershaft Powershift | |
| Travel Speed - Forward 6 | 12.4mph | 20km/h |
| Travel Speed - Forward 5 | 11.8mph | 19km/h |
04 Transmission Specification
| Transmission Type | Power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
05 Hydraulic Specification
| Pump Type | Open center |
|---|
06 Hydraulic System Specification
| Pump Type | Variable displacement piston pump | |
|---|---|---|
| Hydraulic System Type | Load sense, closed center | |
| Pump Output | 58 gal/min |
07 Brakes Specification
| Service | Enclosed wet single disc | |
|---|---|---|
| Transmission Cooler Type | Spring applied, hydraulic released |
08 Service Refill Specification
| Fuel Tank | 99.8gal | 377.8L |
|---|---|---|
| Differential - Final Drives - Front | 13.7gal | 51.9L |
| Differential - Final Drives - Rear | 13.7gal | 51.9L |
| Transmission - Torque Converter | 14.3gal | 54.2L |
| Cooling System | 15.1gal | 57.2L |
| Engine Oil | 7.1gal | 26.9L |
| Differential - Final Drives - Tank | 17.2gal | 65.2L |
| Differential - Final Drives - Total | 32.5gal | 123.1L |
| Def Tank | 5gal | 19L |
09 Grapple Dimensions Specification
| Grapple Capacity | 22ft2 | 2.1m2 |
|---|---|---|
| Tip To Tip Height | 93.2in | 2367.1mm |
| Tong Ppening | 143.8in | 3652.1mm |
| Full Open Height | 78.7in | 1998mm |
| Minimum Stem Diameter | 12.1in | 305.1mm |
| Full Closed Height | 62.1in | 1577.1mm |
10 Lift Chart Specification
| Lift Height, Retracted - Dual Function | 118.3in | 3004.9mm |
|---|---|---|
| Lift Height, Furthest - Dual Function | 86.6in | 2199.7mm |
| Lift Lowest, Furthest - Dual Function | 14.9in | 378.5mm |
| Ground Level To Axle Centerline* - Dual Function | 33.2in | 843.3mm |
| Reach - Highest, Retracted - Dual Function | 64in | 1625.6mm |
| Reach - Lowest, Retracted - Dual Function | 74.1in | 1882.2mm |
| Reach - Lowest, Furthest - Dual Function | 112.7in | 2862.6mm |
| Reach - Highest, Furthest - Dual Function | 118.4in | 3007.4mm |
| Sorting Capacity | 44.3in | 1125.3mm |
11 Winch - Logging Winch Specification
| Maximum Line Pull - Bare Drum | 40016lb ft | 54254.5Nm |
|---|---|---|
| Maximum Line Speed | 280 ft/min | |
| Drum Capacity - 25.4mm (1 In) | 85ft in | 26m |
| Drum Width | 10in | 254mm |
| Winch - Logging Winch Type | Hydraulically driven | |
| Drum Diameter (1) | 9in | 228.6mm |
| Drum Diameter (2) | 195ft in | 59.5m |
12 Winch - Retrival Winch Specification
| Winch - Retrival Winch Type | Hydraulically driven | |
|---|---|---|
| Maximum Line Speed | 134 ft/min | |
| Drum Capacity - 19.0 Mm (3/4 In) | 195ft in | 59.5m |
| Drum Capacity - 25.4 Mm (1 In) | 85ft in | 26m |
| Maximum Line Pull - Bare Drum | 40016lb ft | 54254.5Nm |
| Drum Diameter | 9in | 228.6mm |
| Drum Width | 10in | 254mm |
13 Backhoe Dimensions
| Load Height - Std | 11.49ft in | 3500mm |
|---|---|---|
| Dig Depth - Std | 14.74ft in | 4490mm |
| Bucket Dig Force - Std | 10319.84lb | 4681kg |
14 Dimensions Dimensions
| Blade Width - Wide | 123.5in | 3136.9mm |
|---|---|---|
| Ground Clearance* | 21.7in | 551.18mm |
| Ground Level To Axle Centerline* | 33.21in | 843.28mm |
| Ground Level To Top Arch/Boom* - Dual Function | 177.8in | 4516.12mm |
| Height - Top Of Cylinders | 133.2in | 3383.28mm |
| Blade Lift Height* | 56.1in | 1424.94mm |
| Blade Width - Standard | 105.4in | 2677.16mm |
| Weight - Dual Function | 47488lb | 21540.2kg |
| Blade Dig Depth* | 20.8in | 528.33mm |
| Overall Length - Dual Function | 354.6in | 9006.84mm |
| Overall Width - 30.5l-32 | 133.31in | 3385.82mm |
| Overall Width - 30.5l-32 2x Ring | 126.6in | 3215.64mm |
| Overall Width - 30.5l-32 Noaw | 126.6in | 3215.64mm |
| Overall Width - 35.5l-32 | 145.81in | 3703.32mm |
| Overall Width - 35.5l-32 Noaw | 139.1in | 3533.14mm |
15 Loader Dimensions
| Lift Capacity At Full Height | 6000lb | 2721.56kg |
|---|---|---|
| Bucket Breakout Force | 12000lb | 53.38kN |
?Questions & answersfrom this machine's data
- What engine does a New Holland 555D backhoe loader have?
- A New Holland 555D backhoe loader is powered by a Ford Cat C7.1 ACERT engine producing 65 hp (48.5 kW).
- How deep can a New Holland 555D backhoe loader dig?
- A New Holland 555D backhoe loader has a maximum dig depth of 14.7 ft (4,490 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.