Specification sheet Wheel Loader Ref michigan-l480b-wheel-loader
Michigan L480B
The Michigan L480B is a wheel loader with an operating weight of 179,180 lb (81,274.68 kg), a 620 hp engine, and a 12.56 yd³ (9.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
179,180lb
81,274.68kg
Engine power
620hp
462.4kW
Net Power Bucket capacity
12.56yd³
9.6m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Michigan L480B sits below the median for its class:
- Operating weight 179,180 lb lighter than 71% (n=45)
- Engine power 620 hp less powerful than 98% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 12 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | VTA-28C | |
| Net Power | 620hp | 462.4kw |
| Gross Power | 725hp | 540.7kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 2363lb ft | 3203.8Nm |
| Displacement | 1710cu in | 28.1L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbo + aftercooled |
02 Operational Specification
| Operating Weight | 179180lb | 81274.7kg |
|---|---|---|
| Fuel Capacity | 376gal | 1423L |
| Hydraulic System Fluid Capacity | 248.1gal | 939L |
| Engine Oil Fluid Capacity | 27gal | 102L |
| Cooling System Fluid Capacity | 78gal | 295L |
| Transmission Fluid Capacity | 56.1gal | 212L |
| Front Axle/Diff Fluid Capacity | 30.6gal | 115.5L |
| Rear Axle/Diff Fluid Capacity | 30.6gal | 115.5L |
| Static Tipping Weight | 108220lb | 49087.8kg |
| Turning Radius | 34.1ft in | 10388.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 41.25/70-39 (34PR) L-5 |
03 Transmission Specification
| Transmission Type | Clark 8422 H-206 countershaft type powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 19.9mph | 32km/h |
| Max Speed - Reverse | 19.9mph | 32km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2825psi | 19477.7kPa |
|---|---|---|
| Pump Flow Capacity | 253gal/min | 957.8L/min |
| Raise Time | 11.4sec | |
| Dump Time | 4sec | |
| Lower Time | 5.8sec | |
| Pump Type | three gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 15.5ft in | 4724mm |
|---|---|---|
| Bucket Capacity - Heaped | 12.56yd3 | 9.6m3 |
| Bucket Capacity - Struck | 10.57yd3 | 8.08m3 |
| Bucket Width | 14.36ft in | 4374mm |
| Breakout Force | 142000lb | 631.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 584mm |
|---|---|---|
| Length With Bucket On Ground | 42.42ft in | 12929mm |
| Width Over Tires | 13.51ft in | 4115mm |
| Height To Top Of Cab | 16.01ft in | 4877mm |
| Wheelbase | 15.17ft in | 4623mm |
| Hinge Pin - Max Height | 20.59ft in | 6274mm |
| Reach At Max Lift And Dump | 6.09ft in | 1854mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.