Specification sheet Wheel Loader Ref michigan-l320-long-boom-wheel-loader
Michigan L320 Long Boom
The Michigan L320 Long Boom is a wheel loader with an operating weight of 100,540 lb (45,604.18 kg), a 417 hp engine, and a 7.46 yd³ (5.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
100,540lb
45,604.18kg
Engine power
417hp
311kW
Net Power Bucket capacity
7.46yd³
5.7m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Michigan L320 Long Boom sits below the median for its class:
- Operating weight 100,540 lb lighter than 67% (n=39)
- Engine power 417 hp less powerful than 59% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | KTA 19C | |
| Net Power | 417hp | 311kw |
| Gross Power | 452hp | 337.1kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1597lb ft | 2165.3Nm |
| Displacement | 1150cu in | 18.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbo + aftercooled |
02 Operational Specification
| Operating Weight | 100540lb | 45604.2kg |
|---|---|---|
| Fuel Capacity | 212.2gal | 803L |
| Hydraulic System Fluid Capacity | 160.1gal | 606L |
| Engine Oil Fluid Capacity | 13.5gal | 51.1L |
| Cooling System Fluid Capacity | 35.1gal | 132.5L |
| Transmission Fluid Capacity | 18gal | 68.1L |
| Front Axle/Diff Fluid Capacity | 18gal | 68.1L |
| Rear Axle/Diff Fluid Capacity | 18gal | 68.1L |
| Static Tipping Weight | 67031lb | 30404.8kg |
| Turning Radius | 30.1ft in | 9156.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 35/65-33 (30PR) L-4 |
03 Transmission Specification
| Transmission Type | Clark 6421-11 countershaft type powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.1mph | 35.6km/h |
| Max Speed - Reverse | 13mph | 21km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900psi | 19994.8kPa |
|---|---|---|
| Pump Flow Capacity | 194gal/min | 734.4L/min |
| Raise Time | 9sec | |
| Dump Time | 2.1sec | |
| Lower Time | 5.4sec | |
| Pump Type | three gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.8ft in | 4204mm |
|---|---|---|
| Bucket Capacity - Heaped | 7.46yd3 | 5.7m3 |
| Bucket Capacity - Struck | 6.15yd3 | 4.7m3 |
| Bucket Width | 13ft in | 3962mm |
| Breakout Force | 110200lb | 490.4kN |
06 Dimensions Dimensions
| Ground Clearance | 1.84ft in | 559mm |
|---|---|---|
| Length With Bucket On Ground | 35.3ft in | 10757mm |
| Width Over Tires | 11.92ft in | 3632mm |
| Height To Top Of Cab | 13.75ft in | 4191mm |
| Wheelbase | 13.32ft in | 4059mm |
| Hinge Pin - Max Height | 17.84ft in | 5436mm |
| Reach At Max Lift And Dump | 5.63ft in | 1714mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.