Specification sheet Wheel Loader Ref michigan-l270b-wheel-loader
Michigan L270B
The Michigan L270B is a wheel loader with an operating weight of 91,070 lb (41,308.66 kg), a 360 hp engine, and a 7 yd³ (5.35 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
91,070lb
41,308.66kg
Engine power
360hp
268.5kW
Net Power Bucket capacity
7yd³
5.35m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Michigan L270B sits at the compact end of its class:
- Operating weight 91,070 lb lighter than 100% (n=39)
- Engine power 360 hp less powerful than 95% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | KT-19C | |
| Net Power | 360hp | 268.5kw |
| Gross Power | 400hp | 298.3kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1350lb ft | 1830.4Nm |
| Displacement | 1150cu in | 18.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 91070lb | 41308.7kg |
|---|---|---|
| Fuel Capacity | 188gal | 711.6L |
| Hydraulic System Fluid Capacity | 120gal | 454.2L |
| Engine Oil Fluid Capacity | 11gal | 41.6L |
| Cooling System Fluid Capacity | 26gal | 98.4L |
| Transmission Fluid Capacity | 24.1gal | 90.9L |
| Front Axle/Diff Fluid Capacity | 16gal | 60.5L |
| Rear Axle/Diff Fluid Capacity | 16gal | 60.5L |
| Static Tipping Weight | 56680.9lb | 25710kg |
| Turning Radius | 28.1ft in | 8560mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 29.5-29 (28PR) L-4 |
03 Transmission Specification
| Transmission Type | Clark countershaft type powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.7km/h |
| Max Speed - Reverse | 21.5mph | 34.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18960.6kPa |
|---|---|---|
| Pump Flow Capacity | 175gal/min | 662.5L/min |
| Raise Time | 8.6sec | |
| Dump Time | 3sec | |
| Lower Time | 5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.26ft in | 3734mm |
|---|---|---|
| Bucket Capacity - Heaped | 7yd3 | 5.35m3 |
| Bucket Capacity - Struck | 5.89yd3 | 4.5m3 |
| Bucket Width | 12.34ft in | 3759mm |
| Breakout Force | 80000lb | 355.8kN |
06 Dimensions Dimensions
| Ground Clearance | 1.84ft in | 559mm |
|---|---|---|
| Length With Bucket On Ground | 33.59ft in | 10236mm |
| Width Over Tires | 11.5ft in | 3505mm |
| Height To Top Of Cab | 12.84ft in | 3912mm |
| Wheelbase | 12.34ft in | 3759mm |
| Hinge Pin - Max Height | 16.42ft in | 5004mm |
| Reach At Max Lift And Dump | 5.59ft in | 1702mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.