Specification sheet Wheel Loader Ref michigan-475ct-wheel-loader
Michigan 475CT
The Michigan 475CT is a wheel loader with an operating weight of 174,573.06 lb (79,185 kg), a 639.7 hp engine, and a 12.04 yd³ (9.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
174,573.06lb
79,185kg
Engine power
639.7hp
477kW
Net Power Bucket capacity
12.04yd³
9.2m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Michigan 475CT sits below the median for its class:
- Operating weight 174,570 lb lighter than 80% (n=45)
- Engine power 640 hp less powerful than 78% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 12 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | VTA-28C | |
| Net Power | 639.7hp | 477kw |
| Gross Power | 725.5hp | 541kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 2363.2lb ft | 3204Nm |
| Displacement | 1708.7cu in | 28L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged & intercooled |
02 Operational Specification
| Operating Weight | 174573.1lb | 79185kg |
|---|---|---|
| Fuel Capacity | 273gal | 1033.4L |
| Hydraulic System Fluid Capacity | 248.1gal | 939L |
| Engine Oil Fluid Capacity | 27gal | 102.2L |
| Cooling System Fluid Capacity | 74gal | 280.1L |
| Transmission Fluid Capacity | 55.1gal | 208.2L |
| Front Axle/Diff Fluid Capacity | 29.1gal | 109.8L |
| Rear Axle/Diff Fluid Capacity | 29.1gal | 109.8L |
| Static Tipping Weight | 106800.8lb | 48444kg |
| Turning Radius | 34.1ft in | 10388.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 41.25/70-39 (34PR) L-5 |
03 Transmission Specification
| Transmission Type | Clark turbo transmission | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 15.8mph | 25.4km/h |
| Max Speed - Reverse | 11.2mph | 17.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2700psi | 18615.9kPa |
|---|---|---|
| Pump Flow Capacity | 276.1gal/min | 1045L/min |
| Raise Time | 10sec | |
| Dump Time | 3.7sec | |
| Lower Time | 5.5sec | |
| Pump Type | three gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 15.76ft in | 4801mm |
|---|---|---|
| Bucket Capacity - Heaped | 12.04yd3 | 9.2m3 |
| Bucket Capacity - Struck | 9.84yd3 | 7.52m3 |
| Bucket Width | 14.69ft in | 4475mm |
| Breakout Force | 149003.36lb | 662.8kN |
06 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 584mm |
|---|---|---|
| Length With Bucket On Ground | 41.42ft in | 12624mm |
| Width Over Tires | 13.59ft in | 4140mm |
| Height To Top Of Cab | 16.01ft in | 4877mm |
| Wheelbase | 15.17ft in | 4623mm |
| Hinge Pin - Max Height | 20.59ft in | 6274mm |
| Reach At Max Lift And Dump | 5.76ft in | 1753mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.