Specification sheet Backhoe Loader Ref mecalac-tlb990-loader-backhoe
Mecalac TLB990
The Mecalac TLB990 is a backhoe loader with an operating weight of 18,144.1 lb (8,230 kg), a 88.11 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 14.35 ft (4,371 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,144.1lb
8,230kg
Engine power
88.11hp
65.7kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
14.35ft
4,371mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Mecalac TLB990 sits in the middle of its class:
- Engine power 88 hp more powerful than 54% (n=282)
- Dig depth 14.4 ft shallower-digging than 62% (n=256)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | 1204E–E44TA | |
| Gross Power | 93.9hp | 70kw |
| Net Power | 88.2hp | 65.7kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 295.1lb ft | 400Nm |
| Displacement | 268.6cu in | 4.4L |
| Alternator | 120amps |
02 Operational Specification
| Operating Weight | 18144.1lb | 8230kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Hydraulic System Fluid Capacity | 24.4gal | 92L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Front Axle Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle Fluid Capacity | 4.1gal | 15.5L |
| Operating Voltage | 12V |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 |
04 Hydraulic Specification
| Pump Flow Capacity | 21.2gal/min | 80L/min |
|---|---|---|
| Relief Valve Pressure | 3632psi | 25041.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.87ft in | 3615mm |
|---|---|---|
| Reach From Swivel - Std | 18.72ft in | 5703mm |
| Dig Depth - Std | 14.35ft in | 4371mm |
06 Dimensions Dimensions
| Dump Angle | 45 | |
|---|---|---|
| Hinge Pin Height, Maximum Height | 142.33in | 3615mm |
| Loading Height (Evw) | 11.06ft in | 3369mm |
| Reach @ Ground Level | 4760.5ft in | 1451m |
07 Loader Dimensions
| Bucket Capacity | 1.31yd3 | 1m3 |
|---|
?Questions & answersfrom this machine's data
- What engine does a Mecalac TLB990 backhoe loader have?
- A Mecalac TLB990 backhoe loader is powered by a 1204E–E44TA engine producing 88.1 hp (65.7 kW).
- How deep can a Mecalac TLB990 backhoe loader dig?
- A Mecalac TLB990 backhoe loader has a maximum dig depth of 14.4 ft (4,371 mm).
- How much fuel does a Mecalac TLB990 backhoe loader hold?
- A Mecalac TLB990 backhoe loader has a fuel capacity of 37 gal (140 L).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.