Specification sheet Backhoe Loader Ref mecalac-tlb870-loader-backhoe
Mecalac TLB870
The Mecalac TLB870 is a backhoe loader with an operating weight of 18,144.1 lb (8,230 kg), a 88.11 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 14.35 ft (4,371 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,144.1lb
8,230kg
Engine power
88.11hp
65.7kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
14.35ft
4,371mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Mecalac TLB870 sits in the middle of its class:
- Engine power 88 hp more powerful than 54% (n=282)
- Dig depth 14.4 ft shallower-digging than 62% (n=256)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | 1204E–E44TA | |
| Gross Power | 93.9hp | 70kw |
| Net Power | 88.2hp | 65.7kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 295.1lb ft | 400Nm |
| Displacement | 268.6cu in | 4.4L |
| Alternator | 120amps |
02 Operational Specification
| Operating Weight | 18144.1lb | 8230kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Hydraulic System Fluid Capacity | 24.4gal | 92L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Front Axle Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle Fluid Capacity | 4.1gal | 15.5L |
| Operating Voltage | 12V |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 |
04 Hydraulic Specification
| Pump Flow Capacity | 21.2gal/min | 80L/min |
|---|---|---|
| Relief Valve Pressure | 3632psi | 25041.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.87ft in | 3615mm |
|---|---|---|
| Reach From Swivel - Std | 18.72ft in | 5703mm |
| Dig Depth - Std | 14.35ft in | 4371mm |
06 Dimensions Dimensions
| Dump Angle | 45 | |
|---|---|---|
| Hinge Pin Height, Maximum Height | 142.33in | 3615mm |
| Loading Height (Evw) | 11.06ft in | 3369mm |
| Reach @ Ground Level | 4760.5ft in | 1451m |
07 Loader Dimensions
| Bucket Capacity | 1.31yd3 | 1m3 |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.