Specification sheet Backhoe Loader Ref mecalac-tlb840r-loader-backhoe
Mecalac TLB840R
The Mecalac TLB840R is a backhoe loader with an operating weight of 16,137.9 lb (7,320 kg), a 69.91 hp engine, and a dig depth of 14.48 ft (4,411 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,137.9lb
7,320kg
Engine power
69.91hp
52.13kW
Net Power Dig depth
14.48ft
4,411mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Mecalac TLB840R sits below the median for its class:
- Engine power 70 hp less powerful than 72% (n=282)
- Dig depth 14.5 ft shallower-digging than 56% (n=256)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | TCD 3.6 L4 | |
| Net Power | 69.9hp | 52.2kw |
| Gross Power | 74hp | 55.2kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1300rpm | |
| Displacement | 219.7cu in | 3.6L |
| Alternator | 95amps |
02 Operational Specification
| Operating Weight | 16137.9lb | 7320kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Cooling System Fluid Capacity | 4.5gal | 17L |
| Front Axle Fluid Capacity | 1.9gal | 6.9L |
| Rear Axle Fluid Capacity | 4.6gal | 17.1L |
| Operating Voltage | 12V |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 |
04 Hydraulic Specification
| Pump Flow Capacity | 22gal/min | 83L/min |
|---|---|---|
| Relief Valve Pressure | 3626psi | 25000.4kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.71ft in | 3569mm |
|---|---|---|
| Reach From Swivel - Std | 18.69ft in | 5695mm |
| Dig Depth - Std | 14.48ft in | 4411mm |
06 Dimensions Dimensions
| Hinge Pin Height, Maximum Height | 133.9in | 3401mm |
|---|---|---|
| Dump Angle | 45 | |
| Reach @ Ground Level | 5003.29ft in | 1525m |
| Loading Height (Evw) | 10.32ft in | 3145mm |
07 Loader Dimensions
| Lift Capacity At Full Height | 8287.93lb | 3759.34kg |
|---|---|---|
| Bucket Breakout Force | 9441.98lb | 42kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.