Specification sheet Backhoe Loader Ref manitou-mlb625t-loader-backhoe
Manitou MLB625T
The Manitou MLB625T is a backhoe loader with a 100 hp engine, and a dig depth of 16.34 ft (4,980 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
100hp
74.5kW
Gross Power Dig depth
16.34ft
4,980mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Manitou MLB625T sits at the heavy end of its class:
- Engine power 100 hp more powerful than 87% (n=282)
- Dig depth 16.3 ft deeper-digging than 86% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2351 | |
|---|---|---|
| Engine Model | 1104C44 T | |
| Gross Power | 100hp | 74.5kw |
02 Operational Specification
| Fuel Capacity | 39.7gal | 150L |
|---|---|---|
| Operating Weight 4wd | 16446.5lb | 7460kg |
03 Transmission Specification
| Transmission Type | torque converter | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 15.6mph | 25km/h |
| Max Speed Reverse | 15.6mph | 25km/h |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 48.7gal/min | 184L/min |
05 Backhoe Dimensions
| Load Height - Std | 12.47ft in | 3800mm |
|---|---|---|
| Reach From Swivel - Std | 23.59ft in | 7190mm |
| Dig Depth - Std | 16.34ft in | 4980mm |
| Bucket Dig Force - Std | 14162.5lb | 6424kg |
| Load At Max Lift - Std | 4629.71lb | 2100kg |
06 Dimensions Dimensions
| Transport Length | 22.82ft in | 6953mm |
|---|---|---|
| Transport Width | 8.18ft in | 2493mm |
| Transport Height | 13.01ft in | 3965mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 17.13ft in | 5220mm |
|---|---|---|
| Lift Capacity At Full Height | 5511.56lb | 2500kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.