Specification sheet Wheel Loader Ref liugong-840ii-wheel-loader
LiuGong 840II
The LiuGong 840II is a wheel loader with a 173 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
173hp
129.1kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSB5.9C173 | |
| Net Power | 173hp | 129.1kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 590.1lb ft | 800Nm |
| Displacement | 360.1cu in | 5.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Fuel Capacity | 55.5gal | 210L |
|---|---|---|
| Hydraulic System Fluid Capacity | 60.8gal | 230L |
| Engine Oil Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 9.3gal | 35L |
| Rear Axle/Diff Fluid Capacity | 9gal | 34L |
| Static Tipping Weight | 17637lb | 8000kg |
03 Transmission Specification
| Transmission Type | counter shaft-type power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.5mph | 37.7km/h |
| Max Speed - Reverse | 16mph | 25.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2610.7psi | 18000kPa |
|---|---|---|
| Raise Time | 6.6sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.4sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.52ft in | 2900mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Width | 9.08ft in | 2766mm |
| Breakout Force | 26977.08lb | 120kN |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 24.65ft in | 7511mm |
| Width Over Tires | 8.11ft in | 2470mm |
| Height To Top Of Cab | 10.99ft in | 3347mm |
| Wheelbase | 9.85ft in | 3000mm |
| Hinge Pin - Max Height | 12.44ft in | 3790mm |
| Reach At Max Lift And Dump | 3.4ft in | 1034mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.