Specification sheet Wheel Loader Ref letourneau-l1150-wheel-loader

LeTourneau L1150

The LeTourneau L1150 is a wheel loader with an operating weight of 310,000.79 lb (140,614 kg), a 1,205 hp engine, and a 25 yd³ (19.11 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
310,000.79lb
140,614kg
Engine power
1,205hp
898.6kW
Net Power
Bucket capacity
25yd³
19.11m³

Where it sits in its classpercentile · very large wheel loaders

Among 45 very large wheel loaders (>150,000 lb), the LeTourneau L1150 sits above the median for its class:

  • Operating weight 310,000 lb heavier than 67% (n=45)
  • Engine power 1,205 hp more powerful than 68% (n=41)

Scale drawingdrawn to scale · mm

5820B710C16280A
Side elevation
5820B5110D
Front elevation

01 Engine Specification

Engine Make 2350
Engine Model 16V Series 2000
Net Power 1205hp 898.6kw
Power Measured @ 1800rpm
Displacement 1944cu in 31.9L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 310000.8lb 140614kg
Fuel Capacity 629.8gal 2384L
Hydraulic System Fluid Capacity 260gal 984L
Engine Oil Fluid Capacity 24.9gal 94L
Cooling System Fluid Capacity 88gal 333L
Static Tipping Weight 179202.8lb 81285kg
Turning Radius 34.5ft in 10495mm
Rear Axle Oscillation 22degrees
Tire Size 50/65-51 62PR

03 Transmission Specification

Max Speed - Forward 12mph 19.4km/h
Max Speed - Reverse 12mph 19.4km/h

04 Hydraulic System Specification

Raise Time 12sec
Dump Time 3sec
Lower Time 5sec

05 Bucket Dimensions

Dump Clearance At Max Raise 18.51ft in 5640mm
Bucket Width 18.02ft in 5490mm
Bucket Capacity - Heaped 25yd3 19.11m3

06 Dimensions Dimensions

Ground Clearance 2.33ft in 710mm
Length With Bucket On Ground 53.42ft in 16280mm
Width Over Tires 16.77ft in 5110mm
Height To Top Of Cab 19.1ft in 5820mm
Wheelbase 20.18ft in 6150mm
Hinge Pin - Max Height 25.66ft in 7820mm
Reach At Max Lift And Dump 9.26ft in 2820mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.