Specification sheet Backhoe Loader Ref kubota-r520s-loader-backhoe
Kubota R520S
The Kubota R520S is a backhoe loader with a 44.4 hp engine, a 0.75 yd³ (0.57 m³) bucket, and a dig depth of 9.03 ft (2,750 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
44.4hp
33.1kW
Gross Power Bucket capacity
0.75yd³
0.57m³
Dig depth
9.03ft
2,750mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Kubota R520S sits at the compact end of its class:
- Engine power 44 hp less powerful than 91% (n=282)
- Dig depth 9 ft shallower-digging than 94% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V2203-RP | |
| Gross Power | 44.4hp | 33.1kw |
| Power Measured @ | 2600rpm | |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operating Weight 4wd | 8024.9lb | 3640kg |
|---|---|---|
| Turning Radius | 11.2ft in | 3385mm |
03 Transmission Specification
| Transmission Type | LST | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 11.1gal/min | 42L/min |
| Relief Valve Pressure | 2958psi | 20394.7kPa |
05 Backhoe Dimensions
| Load Height - Std | 6.7ft in | 2040mm |
|---|---|---|
| Reach From Swivel - Std | 12.14ft in | 3700mm |
| Dig Depth - Std | 9.03ft in | 2750mm |
06 Dimensions Dimensions
| Transport Length | 16.9ft in | 5150mm |
|---|---|---|
| Transport Width | 5.78ft in | 1760mm |
| Transport Height | 8.47ft in | 2580mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.67ft in | 2640mm |
|---|---|---|
| Bucket Width | 69.3in | 1760mm |
| Bucket Capacity | 0.75yd3 | 0.57m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.