Specification sheet Backhoe Loader Ref kubota-m59-loader-backhoe
Kubota M59
The Kubota M59 is a backhoe loader with a 57 hp engine, and a dig depth of 11.99 ft (3,652 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
57hp
42.51kW
Net Power Dig depth
11.99ft
3,652mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Kubota M59 sits below the median for its class:
- Engine power 57 hp less powerful than 83% (n=282)
- Dig depth 12 ft shallower-digging than 86% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Gross Power | 59hp | 44kw |
| Net Power | 57hp | 42.6kw |
| Power Measured @ | 2700rpm | |
| Displacement | 148.5cu in | 2.5L |
02 Operational Specification
| Operating Weight 2wd | 8344.5lb | 3785kg |
|---|---|---|
| Fuel Capacity | 14.6gal | 55L |
| Turning Radius | 9.9ft in | 3000mm |
| Tire Size Front - 2wd / 4wd | 10x16.5-R4 | |
| Rear Tires Size 2wd/4wd | 17.5L-24 R4 |
03 Transmission Specification
| Transmission Type | HST Plus | |
|---|---|---|
| Max Speed - Forward | 16mph | 25.6km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 26.7gal/min | 100.9L/min |
|---|
05 Backhoe Dimensions
| Load Height - Std | 8.83ft in | 2690mm |
|---|---|---|
| Reach From Swivel - Std | 15.66ft in | 4773mm |
| Dig Depth - Std | 11.99ft in | 3652mm |
| Reach At Load Height - Std | 5.78ft in | 1759mm |
| Bucket Dig Force - Std | 7602lb | 3448.21kg |
06 Dimensions Dimensions
| Transport Width | 6.25ft in | 1905mm |
|---|---|---|
| Transport Height | 10.33ft in | 3146mm |
| Wheelbase | 6.73ft in | 2050mm |
| Ground Clearance | 1.16ft in | 352mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 7.92ft in | 2412mm |
|---|---|---|
| Reach At Max Dump Height | 1.91ft in | 582mm |
| Dig Depth | 2.72in | 69mm |
| Lift Capacity At Full Height | 3968.3lb | 1800kg |
| Bucket Breakout Force | 5961.3lb | 26.52kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.