Specification sheet Backhoe Loader Ref kubota-l48-loader-backhoe

Kubota L48

The Kubota L48 is a backhoe loader with a 46 hp engine, and a dig depth of 11.22 ft (3,419 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
46hp
34.31kW
Net Power
Dig depth
11.22ft
3,419mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Kubota L48 sits at the compact end of its class:

  • Engine power 46 hp less powerful than 90% (n=282)
  • Dig depth 11.2 ft shallower-digging than 86% (n=256)

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model L48
Net Power 46hp 34.4kw
Gross Power 48hp 35.8kw
Power Measured @ 2600rpm
Displacement 148.5cu in 2.5L

02 Operational Specification

Operating Weight 2wd 7760.3lb 3520kg
Fuel Capacity 13.3gal 50L
Turning Radius 11.2ft in 3400mm
Tire Size Front - 2wd / 4wd 10-16.5R4
Rear Tires Size 2wd/4wd 17.5L-24R4

03 Transmission Specification

Transmission Type HST 3 range
Max Speed - Forward 16.2mph 26km/h

04 Hydraulic Specification

Pump Type open center/constant flow
Pump Flow Capacity 26gal/min 98.1L/min
Relief Valve Pressure 2880psi 19856.9kPa

05 Backhoe Dimensions

Load Height - Std 9.56ft in 2911mm
Reach From Swivel - Std 14.4ft in 4387mm
Dig Depth - Std 11.22ft in 3419mm
Bucket Dig Force - Std 5908lb 2679.83kg

06 Dimensions Dimensions

Wheelbase 6.17ft in 1880mm

?Questions & answersfrom this machine's data

What engine does a Kubota L48 backhoe loader have?
A Kubota L48 backhoe loader is powered by a L48 engine producing 46 hp (34.3 kW).
How deep can a Kubota L48 backhoe loader dig?
A Kubota L48 backhoe loader has a maximum dig depth of 11.2 ft (3,419 mm).
How much fuel does a Kubota L48 backhoe loader hold?
A Kubota L48 backhoe loader has a fuel capacity of 13.3 gal (50 L).
How fast does a Kubota L48 backhoe loader travel?
A Kubota L48 backhoe loader has a maximum forward travel speed of 16.2 mph (26 km/h).

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.