Specification sheet Backhoe Loader Ref kubota-l39-loader-backhoe

Kubota L39

The Kubota L39 is a backhoe loader with a 37.4 hp engine, and a dig depth of 10.09 ft (3,073 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
37.4hp
27.89kW
Net Power
Dig depth
10.09ft
3,073mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Kubota L39 sits at the compact end of its class:

  • Engine power 37 hp less powerful than 94% (n=282)
  • Dig depth 10.1 ft shallower-digging than 89% (n=256)

Scale drawingdrawn to scale · mm

2700A1699C
Front elevation

01 Engine Specification

Number Of Cylinders 3
Engine Model L39
Gross Power 39hp 29.1kw
Net Power 37.4hp 27.9kw
Power Measured @ 2700rpm
Displacement 111.4cu in 1.9L

02 Operational Specification

Operating Weight 2wd 6988.7lb 3170kg
Fuel Capacity 10.6gal 40L
Turning Radius 7.3ft in 2200mm
Tire Size Front - 2wd / 4wd 27x10.5-15R4
Rear Tires Size 2wd/4wd 15-19.5R4

03 Transmission Specification

Transmission Type GST
Number Of Forward Gears 12
Number Of Reverse Gears 8
Max Speed - Forward 14.3mph 23km/h

04 Hydraulic Specification

Pump Flow Capacity 23.5gal/min 88.7L/min

05 Backhoe Dimensions

Load Height - Std 7.61ft in 2319mm
Reach From Swivel - Std 13.41ft in 4087mm
Dig Depth - Std 10.09ft in 3073mm
Reach At Load Height - Std 4.9ft in 1491mm
Bucket Dig Force - Std 5825lb 2642.18kg

06 Dimensions Dimensions

Transport Width 5.58ft in 1699mm
Transport Height 8.86ft in 2700mm
Wheelbase 5.75ft in 1750mm
Ground Clearance 1.03ft in 312mm

07 Loader Dimensions

Clearance At Max Dump Height 7.5ft in 2285mm
Reach At Max Dump Height 1.71ft in 520mm
Dig Depth 3.94in 100mm
Lift Capacity At Full Height 2766.81lb 1255kg
Bucket Breakout Force 3560.98lb 15.84kN

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.