Specification sheet Backhoe Loader Ref kubota-bx25d-loader-backhoe
Kubota BX25D
The Kubota BX25D is a backhoe loader with an operating weight of 1,587.33 lb (720 kg), a 23 hp engine, and a dig depth of 6.05 ft (1,842 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
1,587.33lb
720kg
Engine power
23hp
17.2kW
Gross Power Dig depth
6.05ft
1,842mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Kubota BX25D sits at the compact end of its class:
- Engine power 23 hp less powerful than 98% (n=282)
- Dig depth 6 ft shallower-digging than 100% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Pto Horsepower | 17.7hp | 13.2kw |
| Engine Make | Kubota | |
| Engine Model | D902 | |
| Gross Power | 23hp | 17.2kw |
| Power Measured @ | 3200rpm | |
| Displacement | 54.8cu in | 0.9L |
02 Operational Specification
| Fuel Capacity | 6.6gal | 25L |
|---|---|---|
| Max Weight | 1587.4lb | 720kg |
| Tire Size Front - 2wd / 4wd | 18×8.5–10 | |
| Rear Tires Size 2wd/4wd | 26×12–12 |
03 Transmission Specification
| Transmission Type | HST, High-Low gear shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 8.4mph | 13.5km/h |
| Max Speed Reverse | 6.6mph | 10.5km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 6.2gal/min | 23.5L/min |
|---|
05 Backhoe Dimensions
| Load Height - Std | 5.03ft in | 1533mm |
|---|---|---|
| Reach From Swivel - Std | 2.39ft in | 726mm |
| Dig Depth - Std | 6.05ft in | 1842mm |
| Bucket Dig Force - Std | 1936lb | 878.16kg |
06 Dimensions Dimensions
| Transport Length | 7.96ft in | 2425mm |
|---|---|---|
| Transport Width | 3.71ft in | 1130mm |
| Transport Height | 5.64ft in | 1719mm |
| Wheelbase | 4.6ft in | 1400mm |
| Ground Clearance | 0.73ft in | 220mm |
| Front Wheel Tread Width | 36.62in | 930mm |
| Height To Top Of Suspended Cab | 7.27ft in | 2215mm |
| Rear Tread Range | 32.29in | 820mm |
| Turning Radius Without Brakes 1 | 7.5ft in | 2286mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 4.37ft in | 1330mm |
|---|---|---|
| Reach At Max Dump Height | 2.19ft in | 665mm |
| Dig Depth | 4.73in | 120mm |
| Lift Capacity At Full Height | 518.09lb | 235kg |
| Bucket Width | 48in | 1219.2mm |
| Bucket Breakout Force | 991407.36lb | 4410kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.