Specification sheet Backhoe Loader Ref kubota-bx23s-loader-backhoe
Kubota BX23S
The Kubota BX23S is a backhoe loader with a 23 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
23hp
17.2kW
Gross Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Kubota BX23S sits at the compact end of its class:
- Engine power 23 hp less powerful than 98% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Engine Specification
| Pto Horsepower | 17.7 hp | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | D902 | |
| Engine Type | Liquid-cooled, 3-cylinder diesel | |
| Gross Power | 23hp | 17.2kw |
| Power Measured @ | 3200rpm | |
| Displacement | 54.8cu in | 0.9L |
02 Operational Specification
| Fuel Capacity | 6.6gal | 25L |
|---|---|---|
| Operating Weight 4wd | 1569.7lb | 712kg |
| 3 Point Hitch Type | Optional | |
| 3 Point Hitch Lift Capacity @ 24 Inches | 683.5lb | 310kg |
| Turning Radius | 7.6ft in | 2300mm |
03 Transmission Specification
| Pto Option Available? | Live independent PTO (with hydraulic clutch) | |
|---|---|---|
| Transmission Type | HST, High-Low gear shift ( 2 forward / reverse ) | |
| Max Speed - Forward | 8.4mph | 13.5km/h |
| Max Speed Reverse | 6.6mph | 10.5km/h |
04 Tires Specification
| Standard_Option_Front | 18×8.5–10 | |
|---|---|---|
| Standard_Option_Rear | 26×12–12 |
05 Hydraulic Specification
| Steering Type | Hydraulic power steering | |
|---|---|---|
| Pump Flow Capacity | 6.2gal/min | 23.5L/min |
06 Brakes Specification
| Brakes Type | Wet disc |
|---|
07 Dimensions Dimensions
| Wheelbase | 4.6ft in | 1400mm |
|---|---|---|
| Ground Clearance | 0.7ft in | 213mm |
| Front Tread Range | 36.62in | 930mm |
| Rear Tread Range | 32.29in | 820mm |
| Width | 45.08in | 1145mm |
| Overall Length With 3-Point Hitch | 8.26ft in | 2.52m |
| Height With Rops | 7.19ft in | 2190mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.