Specification sheet Backhoe Loader Ref kubota-b26-loader-backhoe

Kubota B26

The Kubota B26 is a backhoe loader with a 23.1 hp engine, a 0.36 yd³ (0.27 m³) bucket, and a dig depth of 8.32 ft (2,535 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
23.1hp
17.23kW
Net Power
Bucket capacity
0.36yd³
0.27m³
Dig depth
8.32ft
2,535mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Kubota B26 sits at the compact end of its class:

  • Engine power 23 hp less powerful than 98% (n=282)
  • Dig depth 8.3 ft shallower-digging than 97% (n=256)

Scale drawingdrawn to scale · mm

2273B287C5030A
Side elevation
2273B1365D
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Oil Filtration Spin on cartridge
Air Filter Type Dual paper element
Number Of Cylinders 3
Cooling Method Liquid
Pto Horsepower 19.5 hp
Engine Make Kubota
Engine Model D1105
Engine Type Diesel
Gross Power 24.3hp 18.2kw
Net Power 23.1hp 17.3kw
Power Measured @ 2800rpm
Aspiration Natural
Displacement 68.5cu in 1.2L
Bore 3.1in 78mm
Stroke 3.1in 78.4mm
Model Name B26TLB

02 Operational Specification

Fuel Capacity 8.2gal 31L
Operating Weight 4wd 4001.4lb 1815kg
Turning Radius 8.3ft in 2500mm
Tire Size Front - 2wd / 4wd 23x8.50-14 R4
Rear Tires Size 2wd/4wd 12.4-16 R4

03 Electrical Specification

Alternator 40amps
Lighting 2 front work lights, 2 rear work lights, 2 tail lights, 4 ROPS mounted turn signals / 4-way flashers
Battery 12 volts
Block Heater Optional, CSA approved

04 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed - Forward 11.1mph 17.8km/h
Max Speed Reverse 9.8mph 15.8km/h

05 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 11.2gal/min 42.3L/min
Relief Valve Pressure 420.7psi 2900kPa

06 Backhoe Dimensions

Load Height - Std 10.83ft in 3298mm
Reach From Swivel - Std 11.16ft in 3400mm
Dig Depth - Std 8.32ft in 2535mm
Reach At Load Height - Std 4.35ft in 1324mm
Bucket Dig Force - Std 4211lb 1910.08kg

07 Dimensions Dimensions

Transport Length 16.51ft in 5030mm
Transport Width 4.48ft in 1365mm
Transport Height 7.46ft in 2273mm
Wheelbase 5.19ft in 1581mm
Ground Clearance 0.95ft in 287mm
Overall Height 7.46ft in 2273mm
Overall Height (To Top Of Canopy) 16.52ft in 5035mm
Overall Width 53.75in 1365mm

08 Loader Dimensions

Clearance At Max Dump Height 7.19ft in 2189mm
Reach At Max Dump Height 1.87ft in 567mm
Dig Depth 6.97in 177mm
Bucket Breakout Force 2344lb 10.43kN
Lift Capacity At Full Height 1300.73lb 590kg
Bucket Width 59.85in 1520mm
Bucket Capacity 0.36yd3 0.27m3

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.