Specification sheet Wheel Loader Ref komatsu-wa900-3e0-wheel-loader

Komatsu WA900-3E0

The Komatsu WA900-3E0 is a wheel loader with an operating weight of 236,335.6 lb (107,200 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
236,335.6lb
107,200kg

Where it sits in its classpercentile · very large wheel loaders

Among 45 very large wheel loaders (>150,000 lb), the Komatsu WA900-3E0 sits in the middle of its class:

  • Operating weight 236,340 lb heavier than 58% (n=45)

Not positioned on engine power — withheld or unpublished for this machine.

01 Tyres Specification

Standard Fitment Size 45/65-45-58PR-L-5 tubeless

02 Steering System Specification

Steering System Type Articulated type, full-hydraulic power steering
Minimum Turning Radius At The Centre Of Outside Tire 30.2ft in 9200mm
Steering Angle 40degrees

03 Engine Specification

Horsepower, Gross-Sae J1995 901.2hp 672kw
Horsepower, Net-Iso 9249 855.6hp 638kw
Horsepower, Net-Sae J1349 855.6hp 638kw
Fan Drive Method Hydraulic
Lubrication Method Gear pump, force-lubrication
Filter Full-flow and bypass combined
Number Of Cylinders ​12
Engine Model Komatsu SAA2V140E-3
Engine Type Water-cooled, 4-cycle
Air Cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
Governor All-speed, electronic
Rated Power ​2050 rpm
Displacement 1860.1cu in 30.5L
Aspiration Turbocharged, air-to-air aftercooled
Fuel Type Direct injection
Bore 5.6in 140mm
Stroke 6.5in 165mm

04 Driveline Specification

Maximum Speeds Fwd 17.4mph 28km/h
Maximum Speeds Rev 17.6mph 28.3km/h
Service Brake Type Hydraulically actuated, wet disc brakes actuate on four wheels
Parking Brake Type ​Dry disc brake
Number Of Speeds - Forward 3
Number Of Speeds - Reverse 3
Transmission Type Full-powershift, planetary gear

05 Capacities Specification

Fuel Tank 410.8gal 1555L
Cooling System 89.1gal 337L
Hydraulic System 191.6gal 725L
Engine Oil 34.4gal 130L
Torque Converter, Transmission And Retarder Cooling 37gal 140L
Axle Each (Front & Rear) 95.2gal 360L

06 Operational Specification

Standard Bucket Capacity – Sae 17.1yd3 13m3
Static Tipping Load,Full Turn 126611.5lb 57430kg
Breakout Force 67900 kgf
Dump Clearance, @45 Degrees Dump Angle 15.3ft in 4640mm
Dump Reach, @45 Degrees Dump Angle 8.1ft in 2450mm
Bucket Width 15.8ft in 4810mm
Bucket Link Type Z-Bar
Static Tipping Load, Full Straight 144777.6lb 65670kg

07 Transmission Specification

Transmission Type Full-powershift

08 Weights Specification

Operating Weight 236335.6lb 107200kg

09 Hydraulic System Specification

Steering Pump Type Piston Pump
Loader Control Type Piston Pump
Number Of Cylinders 2
Bore 6.3in 160mm
Hydraulic Pump Piston pump
Steering System Capacity 83.3gal/min 315L/min
Loader Control Capacity 109.7gal/min 415L/min
Control Valve 2-spool type
Control Positions Boom Raise, hold, lower, and float
Control Positions Bucket Tilt-back, hold, and dump
Hydraulic Cylinders Type Double-acting, piston type
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Stroke 503 mm
Relief Valve Setting 4977psi 34315.2kPa
Raise Time 11.2sec
Dump Time 2sec
Lower Time 4.8sec

10 Final Drive Specification

Reduction Gear Spiral bevel gear
Differential Gear Straight bevel gear
Final Reduction Gear Planetary gear
Drive System Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22˚ total oscillation

11 Brakes Specification

Parking Brake Dry disc brake
Service Brake Hydraulically actuated, wet disc brakes actuate on four wheels
Emergency Brake Parking brake is commonly used

12 Dimensions Dimensions

Ground Clearance 1.81ft in 550mm
Height To Top Of Cab 17.31ft in 5275mm
Wheelbase 214.57in 5450mm
Length 14270 mm
Turning Circle 30.19ft in 9200mm
Width Over Tyres 180.52in 4585mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.