Specification sheet Wheel Loader Ref komatsu-wa800-3-tier-2-wheel-loader
Komatsu WA800-3 Tier 2
The Komatsu WA800-3 Tier 2 is a wheel loader with an operating weight of 224,650 lb (101,899.54 kg), a 808 hp engine, and a 14.39 yd³ (11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
224,650lb
101,899.54kg
Engine power
808hp
602.6kW
Net Power Bucket capacity
14.39yd³
11m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Komatsu WA800-3 Tier 2 sits in the middle of its class:
- Operating weight 224,650 lb lighter than 51% (n=45)
- Engine power 808 hp more powerful than 51% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 12 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA12V140E-3 | |
| Net Power | 808hp | 602.6kw |
| Gross Power | 853hp | 636.1kw |
| Power Measured @ | 2000rpm | |
| Displacement | 1860cu in | 30.5L |
| Aspiration | Turbocharged and Aftercooled |
02 Operational Specification
| Operating Weight | 224650lb | 101899.6kg |
|---|---|---|
| Fuel Capacity | 410.8gal | 1555.1L |
| Hydraulic System Fluid Capacity | 191.5gal | 725L |
| Engine Oil Fluid Capacity | 34.3gal | 129.9L |
| Cooling System Fluid Capacity | 89gal | 337L |
| Transmission Fluid Capacity | 37gal | 140.1L |
| Front Axle/Diff Fluid Capacity | 95.1gal | 360L |
| Rear Axle/Diff Fluid Capacity | 95.1gal | 360L |
| Static Tipping Weight | 134680lb | 61089.9kg |
| Turning Radius | 35.8ft in | 10900mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 90amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 45/65-45-45 |
03 Transmission Specification
| Transmission Type | Full-powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 17.4mph | 28km/h |
| Max Speed - Reverse | 17.6mph | 28.3km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 4550psi | 31371.2kPa |
|---|---|---|
| Pump Flow Capacity | 107gal/min | 405.1L/min |
| Raise Time | 11.2sec | |
| Dump Time | 2sec | |
| Lower Time | 4.8sec | |
| Pump Type | Piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 15.2ft in | 4630mm |
|---|---|---|
| Bucket Capacity - Heaped | 14.39yd3 | 11m3 |
| Bucket Capacity - Struck | 12.17yd3 | 9.31m3 |
| Bucket Width | 15.79ft in | 4810mm |
| Breakout Force | 152120lb | 676.67kN |
06 Dimensions Dimensions
| Ground Clearance | 1.81ft in | 550mm |
|---|---|---|
| Length With Bucket On Ground | 45.81ft in | 13960mm |
| Width Over Tires | 15.05ft in | 4585mm |
| Height To Top Of Cab | 17.31ft in | 5275mm |
| Wheelbase | 17.89ft in | 5450mm |
| Hinge Pin - Max Height | 22.27ft in | 6785mm |
| Reach At Max Lift And Dump | 7.83ft in | 2385mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.