Specification sheet Wheel Loader Ref komatsu-wa80-3-wheel-loader
Komatsu WA80-3
The Komatsu WA80-3 is a wheel loader with a 59.01 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
59.01hp
44kW
Gross Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D102E | |
| Gross Power | 59.1hp | 44kw |
| Power Measured @ | 1850rpm | |
| Displacement | 239.3cu in | 4L |
02 Operational Specification
| Fuel Capacity | 19.9gal | 75L |
|---|---|---|
| Tire Size | 17.5/65-20 |
03 Transmission Specification
| Number Of Forward Gears | 2 | |
|---|---|---|
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 19.9mph | 32km/h |
| Max Speed - Reverse | 19.9mph | 32km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.04ft in | 2450mm |
|---|---|---|
| Bucket Capacity - Struck | 0.92yd3 | 0.7m3 |
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 17.31ft in | 5275mm |
| Width Over Tires | 6.27ft in | 1910mm |
| Height To Top Of Cab | 9.36ft in | 2850mm |
| Wheelbase | 7.39ft in | 2250mm |
| Hinge Pin - Max Height | 10.19ft in | 3105mm |
| Reach At Max Lift And Dump | 2.91ft in | 885mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.