Specification sheet Wheel Loader Ref komatsu-wa700-3-wheel-loader
Komatsu WA700-3
The Komatsu WA700-3 is a wheel loader with an operating weight of 157,851 lb (71,600 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
157,851lb
71,600kg
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Komatsu WA700-3 sits at the compact end of its class:
- Operating weight 157,850 lb lighter than 98% (n=45)
Not positioned on engine power — withheld or unpublished for this machine.
01 Tyres Specification
| Standard Fitment Size | Standard45/65 R39 L5 |
|---|
02 Steering System Specification
| Steering System Type | Articulated type, fullhydraulic power steering | |
|---|---|---|
| Minimum Turning Radius At The Centre Of Outside Tire | 26.6ft in | 8095mm |
| Steering Angle | 40degrees |
03 Engine Specification
| Horsepower, Net-Iso 9249 | 673.2hp | 502kw |
|---|---|---|
| Horsepower, Net-Sae J1349 | 673.2hp | 502kw |
| Fan Drive Method | Hydraulic | |
| Lubrication Method | Gear pump, force-lubrication | |
| Filter | Full-flow type | |
| Number Of Cylinders | 6 | |
| Engine Model | Komatsu SAA6D170E-3 | |
| Engine Type | Water-cooled, 4-cycle | |
| Air Cleaner | Dry type with double elements and dust evacuator, plus dust indicator | |
| Governor | Electronic, all-speed control | |
| Rated Power | 2000 | |
| Displacement | 1412.7cu in | 23.2L |
| Aspiration | Turbocharged and aftercooled | |
| Fuel Type | Direct injection | |
| Bore | 6.7in | 170mm |
| Stroke | 6.7in | 170mm |
04 Driveline Specification
| Brake | Hydraulic, Wet disc | |
|---|---|---|
| Ride Control System | Standard | |
| Maximum Speeds Fwd | 21.7mph | 34.9km/h |
| Maximum Speeds Rev | 23.4mph | 37.5km/h |
| Number Of Speeds - Forward | 4 | |
| Number Of Speeds - Reverse | 4 | |
| Transmission Type | Automatic Powershift |
05 Capacities Specification
| Fuel Tank | 290.6gal | 1100L |
|---|---|---|
| Cooling System | 55.3gal | 209L |
| Hydraulic System | 124.2gal | 470L |
| Engine Oil | 13.8gal | 52L |
| Torque Converter, Transmission And Retarder Cooling | 27.8gal | 105L |
| Axle Each (Front & Rear) | 64.8gal | 245L |
06 Operational Specification
| Bucket Capacity Range – Sae | 8.7 - 9.4 m3 | |
|---|---|---|
| Standard Bucket Capacity – Sae | 11.4yd3 | 8.7m3 |
| Bucket Description | Spade nose with teeth and segments | |
| Static Tipping Load,Full Turn | 90543.9lb | 41070kg |
| Breakout Force | 52700 kgf | |
| Dump Clearance, @45 Degrees Dump Angle | 13.5ft in | 4085mm |
| Dump Reach, @45 Degrees Dump Angle | 7.1ft in | 2135mm |
| Bucket Width | 14.3ft in | 4330mm |
| Bucket Link Type | Z-Bar |
07 Transmission Specification
| Transmission Type | Automatic full-powershift, countershaft type |
|---|
08 Weights Specification
| Operating Weight | 157851lb | 71600kg |
|---|
09 Hydraulic System Specification
| Steering Pump Type | Piston Pump | |
|---|---|---|
| Loader Control Type | Piston Pump | |
| Number Of Cylinders | 2 | |
| Bore | 5.2in | 130mm |
| Hydraulic Pump | Piston pump | |
| Steering System Capacity | 53.7gal/min | 203L/min |
| Loader Control Capacity | 107gal/min | 405L/min |
| Control Valve | 2-spool type | |
| Control Positions Boom | Raise, hold, lower, and float | |
| Control Positions Bucket | Tilt-back, hold, and dump | |
| Hydraulic Cylinders Type | Double-acting, piston type | |
| Boom | Raise, hold, lower, and float | |
| Bucket | Tilt-back, hold, and dump | |
| Stroke | 532 mm | |
| Relief Valve Setting | 4550psi | 31371.2kPa |
| Raise Time | 9.7sec | |
| Dump Time | 2.5sec | |
| Lower Time | 3.6sec |
10 Final Drive Specification
| Reduction Gear | Spiral bevel gear | |
|---|---|---|
| Differential Gear | Straight bevel gear | |
| Final Reduction Gear | Planetary gear, single reduction, oil bath | |
| Drive System | Four-wheel drive | |
| Front | Fixed, full-floating | |
| Rear | Center-pin-support, fullfloating 22° total oscillation |
11 Brakes Specification
| Parking Brake | Dry-disc type, hydraulic released, spring applied on front drive shaft | |
|---|---|---|
| Service Brake | 4-wheel, systematic brake for front/rear wheel, hydraulically actuated, wet multiple-disc | |
| Emergency Brake | Uses parking brake |
12 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 585mm |
|---|---|---|
| Height To Top Of Cab | 15.87ft in | 4835mm |
| Wheelbase | 188.98in | 4800mm |
| Length | 12160 mm | |
| Width Over Tyres | 163.78in | 4160mm |
?Questions & answersfrom this machine's data
- How much does a Komatsu WA700-3 wheel loader weigh?
- A Komatsu WA700-3 wheel loader has an operating weight of 157,851 lb (71,600 kg).
- What is the ground clearance of a Komatsu WA700-3 wheel loader?
- A Komatsu WA700-3 wheel loader has a ground clearance of 1.9 ft (585 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.