Specification sheet Wheel Loader Ref komatsu-wa600-6-wheel-loader
Komatsu WA600-6
The Komatsu WA600-6 is a wheel loader with an operating weight of 119,049.7 lb (54,000 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
119,049.7lb
54,000kg
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Komatsu WA600-6 sits above the median for its class:
- Operating weight 119,050 lb heavier than 82% (n=39)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Steering System Specification
| Steering System Type | Articulated | |
|---|---|---|
| Minimum Turning Radius At The Centre Of Outside Tire | 23.3ft in | 7075mm |
02 Engine Specification
| Horsepower, Gross-Sae J1995 | 531.1hp | 396kw |
|---|---|---|
| Horsepower, Net-Iso 9249 | 527.1hp | 393kw |
| Fan Drive Method | Hydraulic | |
| Lubrication Method | Gear pump, force-lubricatio | |
| Filter | Full-flow type | |
| Number Of Cylinders | 6 | |
| Piston Displacement | 1412.7cu in | 23.2L |
| Engine Make | 2238 | |
| Engine Model | SAA6D170E-5 | |
| Engine Type | Water-cooled, 4-cycle | |
| Air Cleaner | Dry type | |
| Governor | All-speed, electronic | |
| Displacement | 1412.7cu in | 23.2L |
| Aspiration | Turbocharged, after cooledEGR | |
| Bore | 6.7in | 170mm |
| Stroke | 6.7in | 170mm |
| Fuel System | Direct injection |
03 Driveline Specification
| Brake | Hydraulic, Wet disc | |
|---|---|---|
| Ride Control System | Standard | |
| Maximum Speeds/Fwd Mph (Km/H) | 37 | |
| Maximum Speeds/Rev Mph (Km/H) | 37 | |
| Transmission | Automatic Powershift | |
| Number Of Speeds - Forward | 4 | |
| Number Of Speeds - Reverse | 4 |
04 Capacities Specification
| Front Axle | 9458.7cu in | 155L |
|---|---|---|
| Fuel Tank - Diesel | 189.7gal | 718L |
| Cooling System | 38.9gal | 147L |
| Rear Axle | 41gal | 155L |
| Hydraulic System | 117.1gal | 443L |
| Engine Oil | 22.8gal | 86L |
| Torque Converter, Transmission And Retarder Cooling | 22gal | 83L |
05 Operational Specification
| Bucket Capacity Range – Sae | 6.4 - 7.0 m3 | |
|---|---|---|
| Standard Bucket Capacity – Sae | 8.4yd3 | 6.4m3 |
| Bucket Description | GP Bucket, Bolt Edge | |
| Static Tipping Load,Full Turn | 50510.2lb | 22911kg |
| Breakout Force | 25000 kgf | |
| Dump Clearance, @45 Degrees Dump Angle | 10.9ft in | 3295mm |
| Dump Reach, @45 Degrees Dump Angle | 5ft in | 1500mm |
| Bucket Width | 9ft in | 2740mm |
| Bucket Link Type | Z-bar |
06 Transmission Specification
| Transmission Type | Full-power shift, planetary type | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.1mph | 33.8km/h |
| Max Speed - Reverse | 23mph | 37km/h |
07 Tires Specification
| Standard Fitment Size | 35/65 R33 2star L5 |
|---|
08 Weights Specification
| Operating Weight | 119049.7lb | 54000kg |
|---|
09 Hydraulic System Specification
| Steering Pump Type | Piston Pump | |
|---|---|---|
| Loader Control Type | Piston Pump | |
| Number Of Cylinders | 2 | |
| Bore | 4.6in | 115mm |
| No.Of.Bucket Cylinders | 1 | |
| Loader Control Capacity | 126.3gal/min | 478L/min |
| Control Valve | 2-spool type | |
| Control Positions Boom | Raise, hold, lower, and float | |
| Control Positions Bucket | Tilt-back, hold, and dump | |
| Hydraulic Cylinders Type | Double-acting, piston type | |
| Lift Cylinder Stroke | 42.1in | 1067mm |
| Lift Cylinder | 2 | |
| Lift Cylinder Bore | 7.9in | 200mm |
| Bucket Cylinde Bore | 8.9in | 225mm |
| Bucket Cylinde Stroke | 30.6in | 776mm |
| Stroke | 20.1in | 510mm |
| Relief Valve Setting | 34.3 MPa 350 kgf/cm 4,980 PSI | |
| Pump Flow Capacity | 43.1gal/min | 163L/min |
| Raise Time | 9.3sec | |
| Dump Time | 2.3sec | |
| Lower Time | 4.1sec |
10 Axles Specification
| Drive System | Four-wheel drive | |
|---|---|---|
| Front | Fixed, semi-floating | |
| Rear | Center-pin support, semi-floating, 24 ̊ total oscillation |
11 Hydraulic System Specification
| Pump Type | Piston Pump |
|---|
12 Final Drive Specification
| Reduction Gear | Spiral bevel gear | |
|---|---|---|
| Differential Gear | Torque proportioning | |
| Final Reduction Gear | Planetary gear, single reduction |
13 Brakes Specification
| Parking Brake | Wet | |
|---|---|---|
| Service Brake | Hydraulically actuated | |
| Emergency Brake | Parking brake is commonly used |
14 Dimensions Dimensions
| Ground Clearance | 1.73ft in | 525mm |
|---|---|---|
| Width Over Tires | 11.62ft in | 3540mm |
| Height To Top Of Cab | 14.64ft in | 4460mm |
| Wheelbase | 14.77ft in | 4500mm |
| Length | 471.86in | 11985mm |
| Turning Circle | 56.47ft in | 17210mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.