Specification sheet Wheel Loader Ref komatsu-wa600-3-wheel-loader
Komatsu WA600-3
The Komatsu WA600-3 is a wheel loader with an operating weight of 101,776.41 lb (46,165 kg), a 458 hp engine, and a 7.98 yd³ (6.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
101,776.41lb
46,165kg
Engine power
458hp
341.6kW
Net Power Bucket capacity
7.98yd³
6.1m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Komatsu WA600-3 sits below the median for its class:
- Operating weight 101,780 lb lighter than 62% (n=39)
- Engine power 458 hp more powerful than 54% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA6D170E-3 | |
| Net Power | 458hp | 341.6kw |
| Gross Power | 522hp | 389.3kw |
| Power Measured @ | 2000rpm | |
| Displacement | 1412.7cu in | 23.2L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 101776.5lb | 46165kg |
|---|---|---|
| Fuel Capacity | 177gal | 670L |
| Hydraulic System Fluid Capacity | 56.8gal | 215L |
| Engine Oil Fluid Capacity | 12.5gal | 47L |
| Cooling System Fluid Capacity | 42.3gal | 160L |
| Transmission Fluid Capacity | 29.1gal | 110L |
| Front Axle/Diff Fluid Capacity | 32.8gal | 124L |
| Rear Axle/Diff Fluid Capacity | 32.8gal | 124L |
| Static Tipping Weight | 73391.9lb | 33290kg |
| Turning Radius | 27.9ft in | 8485mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 35/65-33 24PR (L4) |
03 Transmission Specification
| Transmission Type | automatic, full powershift, planetary gear | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.7mph | 36.5km/h |
| Max Speed - Reverse | 24.9mph | 40km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 130gal/min | 492L/min |
| Raise Time | 8.2sec | |
| Dump Time | 2.4sec | |
| Lower Time | 4.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11ft in | 3350mm |
|---|---|---|
| Bucket Capacity - Heaped | 7.98yd3 | 6.1m3 |
| Bucket Capacity - Struck | 6.68yd3 | 5.1m3 |
| Bucket Width | 12.09ft in | 3685mm |
| Breakout Force | 82898.3lb | 368.75kN |
06 Dimensions Dimensions
| Ground Clearance | 1.63ft in | 495mm |
|---|---|---|
| Length With Bucket On Ground | 30.47ft in | 9285mm |
| Width Over Tires | 11.72ft in | 3570mm |
| Height To Top Of Cab | 13.95ft in | 4250mm |
| Wheelbase | 13.46ft in | 4100mm |
| Hinge Pin - Max Height | 16.92ft in | 5155mm |
| Reach At Max Lift And Dump | 6.53ft in | 1990mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.